Random good picture Not show

1, Centerline discharge pump casings are not acceptable.

2, Inspecting centerline positioning for shaft system and rudder system before boring.

3, The directional angles of the centerline of the straight portions of the bent tube are then calculated with the output angles r...

4, Minimum dimension from centerline of valve to handwheel when ordered without floorstand.

5, CHECK FOR FAILED TORQUE CONVERTER, MAIN CENTERLINE, OR DIFF PER SERVICE MANUAL PROCEDURES.

6, Centerline shrinkage is the main defect that affects the inner quality of continuous casting slab.

7, Consult factory for centerline to top dimensions ( open and closed ) for split wedge valves.

8, The centerline of elastic rod or elastic filament can be abstracted as space curves to deal with them by the knowledge of the theory of space curve and differential geometry.

9, Specify required extension length from centerline of valve to handwheel.

10, Minimum dimension from centerline of valve to base of floorstand when ordered with position indicating floorstand.

11, In this paper, a new centerline extraction algorithm based on Hessian Matrix is proposed.

12, As a result of actuating device, the centerline velocity distribution shows that the amplitude decreases gradually, which represents the radical characteristic of vorticity development.

13, Specify required length from centerline of valve to base of floorstand.

14, In this part , a centerline extraction based on 3 D Euclidean distance transform is presented.

15, Foremast shall be installed on the centerline of ship's stem.

16, Centerline shrinkage and segregation are the main defects of continuous casting billet.

17, There is another diffusely broadcasting group of neurons scattered along the centerline near the surface of the brain stem.

18, Based on the underground of high efficient CC in Ma'steel, the longitudinal surface crack and centerline crack, the uppermost defects of beam blank CC production are studied.

19, The integral type housing, hypoid gear design has the centerline of the pinion set above the centerline of the ring gear.

20, It is found that the star_shaped nozzle jet has a shorter initial section and slower velocity attenuation along the jet centerline in the main region than the round nozzle jet.

21, In some cases the designer has placed the King Pin axis so close to the wheel that the king pin centerline becomes very close to the tire patch.

22, Castellated members are formed by cutting H-section steels in a zigzag or circular arc pattern along its centerline and then rejoining the two halves by welding makes.

23, It is found that the' delamination always takes place along the centerline segregation band in pipe-line steel produced by continuous casting and then controlled rolling.

24, Now let go of your back hand backback foot and place it on the centerline.

25, Local coordinate system of each sampling point is set up after fitting the vessel centerline with B-spline curve.

26, Based on zero crossing representation of wavelet transform of this radial function and matching procedure,(http://sentencedict.com/centerline.html) a new algorithm to identify orbits of shaft centerline is proposed.

27, The swing arms are fastened to the inside structure of the mast, and permit the pipe rack to be low-ered from the stored position to the centerline of the drill string.

28, Datum reference circle. Text can be positioned above and below centerline.

29, After DT , according to the local character the centerline voxels the initial centerline points is extracted.

30, The life worried and the promptly pleasure sough are one of the most important centerline of thoughts.