Random good picture Not show

61. Lubricant fitting is provided to permIt'stem bushing lubrication for ease of operation.

62. Plain Bearing Block Housings are made up of cap, base , aluminum bronze bushing and installing bolts, which mainly bear radial load.

63. The feeding zone with a grooved bushing can work successfully out transport of the special soft oilseed with high oil content and low crude fiber content without other forced feeding sets.

64. The range includes track roller, carrier roller, sprocket, idler, track link assembly, track shoe, track bolt and nut, bucket pin and bushing etc.

65. Metal switchboard on the oil - filled bushing should be in termination under oil.

66. There was no damage found inside, but there was a little of metal powder in the arc chamber and porcelain bushing and some of the powder has been burned.

67. Whenever possible all pilot holes require a press fit bushing.

68. Reliability- The process fluid flows through the trim, flushing away solid deposits above and below the guide bushing , thus reducing the possibility of a sticking valve plug.

69. Backseat? machined bonnet stem bushing provides back - up stem seal.

70. Tap-Lock Timing BELT pulley with Taper-Lock Bushing is easy on and off, it can be used on variable hubs due to Taper-Lock bushing Bushing bores.

71. It's a 4.5-link system that includes a unique, L-shaped upper control arm that attaches to the knuckle at one end and incorporates a ride bushing in the rear.

72. Moreover, increasing the stiffness and damping of lower control arm rear bushing and the steering column inertia can effectively reduce the shimmy caused by brake judder.

73. Reserve wire wall bushing at the wall entrance of pipes. The location and quantity of pipes should be fixed according to the location and quantity of penetrating wires.

74. Our main products include chain track, track roller, carrier wheel, guiding wheel, driving wheel, track shoe screw, shaft sleeve, pin, bushing, and link rod, recoil spring etc.

75. Line canal is by make shoe, bushing, sieve tube , buckle the composition such as pipe nipple.

76. The rotating slipring is insulated from the shaft by a laminated plastic bushing.

76. Sentencedict.com is a sentence dictionary, on which you can find good sentences for a large number of words.

77. In using the model DC6105 diesel engine, connecting rod cracks and its small end bushing breakdown are occasionally happened.

78. Induction temperature head bushing is a ring outside refrigeratory induction temperature head. ITs function is to fix and protect induction temperature head.

79. The grading capacitor chiefly consists of body, metal expanders, impregnant and porcelain bushing.

80. We can make products according GB, IEC, AS, BS, ANSI, DIN standards. Our company mainly produce Post insulator, Pin insulator and Porcelain Bushing.

81. First time test on the sea water frost heaving characteristics in sealed bushing of oil well in the sea was made in 1998. A measurement system for the various kinds of parameters is set up.

82. Arrester. Fuse, isolating switch and high-current high-current wall bushing wear.

83. In some cases the small end of the rod is clamped to the pin or has a bushing in it to allow the pin and rod oscillation.

84. The adapter bushing and key may be different from illustration shown.

85. All bus and the ramus bus are covered with pyrocondensation bushing.

86. The generator loss is composed of iron loss, bearing friction loss, bushing friction loss and windage loss.

87. We produce porcelain insulator, porcelain bushing, fuse cutout, lightning arrester and composite insulator.

88. Place Taper - lock Bushing and Timing Belt Pulley on the transmission shaft.

89. Insert lower half of bushing into square hole in crossmember.

90. The utility model relates to a hole enlarging drill bushing, which belongs to a processing knife tool.