Random good picture Not show

61. These devices work on the principle that the oscillating frequency of a crystal under an applied voltage changes with crystal mass.

62. Remove the voltage regulator box and connect the large wires A, A1 and D together.

63. This would give double the required output voltage which could easily cause damage to the power supply components and beyond.

64. All other flying leads for the switches and indicators are at low voltage and these can be soldered directly to the p.c.b.

65. It also makes sure that the extra load of the solenoid valve does not cause problems due to sudden voltage drops.

66. A simple diode clamping circuit provided the activation function, limiting the voltage to /-Vclamp.

67. There is often little need to control the detector electrode composition with a redox reaction simply driven by an appropriate polarising voltage.

68. The voltage is usually 220v and we recommend you take a universal plug adapter for electrical appliances.

69. Signal voltage gain is always accompanied by greater signal current attenuation and viceversa with a transformer.

70. Likewise, the arsenic atoms appear if the voltage is positive.

71. Patterns of in-phase and out-of-phase voltage and current signals can be utilised to recognise and in some circumstances correct for Groningen effects.

72. The other acts as a pickup coil producing a voltage proportional to the rate of change of magnetic flux linking it.

73. It does make sense that the lateral line would be adversely affected by prolonged exposure to unusually high voltage.

74. As the voltage at pin 5 rises, output 1 will become negative, followed by output 2 etc.

75. It can protect your equipment from hazardous brownouts that occur when electric companies reduce voltage during periods of peak demand.

76. A waveform analyser processes the voltage signals and returns Position detector pulses to the control unit at the required Positions.

77. Readers will doubtless already be well aware that the voltage ratings quoted for electrolytic capacitors are really quite important.

78. This has obvious implications for making floating current measurements in high voltage distribution systems.

79. A voltage across opposite sides of the sausage makes the whole thing into a huge Geiger-counter.

80. A drop in voltage can be more serious than a power cut.

81. Then impulses travel down both branches, and so on, until shifting the presynaptic voltage at a thousand different synapses.

82. This may be used to set the voltage at pin 6, with pin 4 connected to 0V.

83. Thus the output voltage will be held at a voltage equal to that at pin 3.

84. After a moment, of course, the voltage subsides to its on-load value,(http://sentencedict.com/voltage.html) which is smaller.

85. An alternative choice of independent variables that is more convenient for certain types of four-terminal network is the input current and output voltage.

86. This will change the voltage at any porthole whose current line is affected, and the appropriate voltmeter will register the fact.

87. During these freewheeling intervals the effective phase voltage is equal to the d.c. supply voltage.

88. Hence the output voltage, within the design limits, remains constant over a wide range of current and input voltage variations.

89. Having established the phasor relationship between the fundamental components of phase voltage and current, the pull-out torque can be found directly.

90. This switched supply introduces a non-linearity, which can be eliminated by considering only the fundamental components of voltage and current.