Random good picture Not show

31. The feed tube is mounted to the piston chamber.

32. Chamfer the piston ring slightly.

33. Get lathe No.9 set to turn the new piston.

34. The gas piston has its own return spring.

35. With the piston action of unmelted wire, for some Fused Deposition Modeling (FDM) the melted polymer is extruded by the driving force from feeding polymer wire.

36. A shaft on the piston forms the armature of a coil.

37. The second method is to calculate the pressure difference of the entrance and exit by the CFD module of ANSYS in the different piston speed circumstances.

38. A spring holds the other ends in contact with the piston of a hydraulic cylinder.

39. In this paper, a short orifice between the sliding shoe bearing surface and piston head is used to compensate the damping function of the narrow-long orifice, and det...

40. Filled Teflon can be used as tabbing rings, piston rings, bearing material and sealing material.

41. Hot load and mechanical load coupling make piston to produce crackle, piston-ring glued and scuffing of cylinder bore and so on.

42. This damper consists of cylinder, piston rod, piston head, orifice, silicon fluid and pressure adjustment valve.

43. The underside forms the combustion chamber with the top of the piston.

44. Watt's engine also used hot steam , not cold air, to force down the piston.

45. The apparatus and method thereby compensates for variations in slave cylinder piston 62 zero position due to clutch wear.

46. A simple testing method of wear resistance for piston ring and cylinder sleeve is introduced.

47. A molecule striking an advancing piston recoils with increased speed.

48. The tube wall of same section of near end of said piston chamber has three uniformly distributed small projections to prevent the piston out of the piston chamber from near end.

49. The method of the equivalent short plane instead of the short piston is used to measure the S-parameters of two-port network.

50. The traditional parameters of a piston pin surface include the arithmetical mean deviation of the profile ( R a ) and the mean spacing of the profile irregularities ( Sm ) etc.

51. Piston slap will be more noticeable when the engine is cold.

52. As the piston reaches BDC again,[www.Sentencedict.com] the exhaust valve opens.

53. As the piston moves up, it creates a vacuum which helps suck the material down the material feed tube and into the piston chamber.

54. The invention relates to a screw self-lock type syringe which consists of a syringe tube, a piston rod, a pin, etc.

55. The FEM for the assembly parts of piston, gudgeon pin and small-end of connecting rod is constructed to investigate a diesel engine piston with an oscillating-oil-cooling channel.

56. However, someone thinks that the optimum oil recovery mode of Lunnan oilfield should be hydraulic piston pump.

57. Our main products include pin, block, piston and sleeve, which are mainly used in engineering machine, wind generator and food package machine.

58. The rotating ramjet is a new conceptive engine based on the ram-compressed technology without any blade or piston but only a ram-compressed rotor is used as its moving core component.

59. Piston best in quality, high accuracy, low to expand, able to bear high temperature, kind intensity that produce.

60. Die Casting Machine Supplies: plunger head , cylinder, piston oil spray, and so on.