Random good picture Not show

1. Tool steels are normally spheroidized to improve machinability.

2. The machinability of gray iron was analyzed.

3. The machinability for machinable ceramics containing rare-earth phosphates was analysed with the material removal rates, grinding forces and SEM.

4. The method of decomposition and machinability evaluation used for multi-layer and concentric holes of complex box-shaped parts is discussed and it has been applied to CAPP-NC system.

5. Comparing the mechanical properties with the machinability, we point out that the existing profiles of the keyless connection parts are yet to be improved.

6. Because window of model steel door is having machinability , energy-saving, sound insulation, wait a series of advantage, its are making the trend that constructs a field.

7. The structure , property and machinability of materials of sedan - car engine block was tested and studied.

8. The paper presents the machinability of crystal materials, and emphasizes the influence of cutting conditions on the mirror finish.

9. Improving machinability of engineering ceramic materials via microstructural design is the key to resolving the problem of difficult machining of ceramic materials.

10. It power boasts excellent machinability , high corrosion resistance , gond weldability and conductivity.

11. Machinability of cast iron, especially white cast iron, was explained.

12. The machinability evaluation will be an important reference for determination of tools and machining parameters during ceramic machining processes.

13. In order to evaluate machinability of ceramics materials objectively, data envelopment analysis(DEA) model for machinability evaluation of machinable ceramic materials was established.

14. Considering the good stability and machinability of polymer materials, novel functional polymers are expected to be developed by bonding calixarenes into the polymers.

15. The machinability of a new type material used for the roll-sleeve in the transnormal roll casting of aluminum alloys was researched.

16. The globular structure obtained gives improved machinability to the steel. This treatment is particularly useful for hypereutectoid steels that must be machined.

17. Machinability of P/M sintered steels with manganese sulfide and calcium fluoride additives is investigated and analyzed by experiments of sintering and cutting on milling machine.

18. It power boasts excellent machinability, high corrosion resistance, gond weldability conductivity.

19. The test results shows that there is a linear relationship between Brinell Hardness and the machinability of cast iron with homogeneous microstructure or tiny carbides.

20. Research on HT250 gray iron flame welding with multi-alloying cast iron torch welding rods. Hardness,[sentence dictionary] crack resistance and machinability of the welded joint is tested and analyzed.

21. The preparation of nano - ceramic composite cutting tools and the advances in the researches on the machinability of cast iron by nano - ceramic composite cutting tools were reviewed.

22. Bronze has a higher strength than pure copper, is easily cast, has improved machinability , and is very easily joined by soldering or brazing.

23. The experimental results were in accordance with the rank of machinability evaluation of ceramics. This method can be used in machinability evaluation of ceramic materials.

24. However, logarithmic spiral can be used to substitute for the Archimedes curve to solve such problems and guarantee the stability of cutter machinability .

25. To improve the homogeneity of manganese sulfide and calcium fluoride, the machinability could be enhanced.

26. FIG. 3 shows the effect of billet reheat temperature and time on machinability.

27. Drilling deep holes in stainless steels, materials of difficult machinability such as titanium and inconel.