Random good picture Not show

31. The button lithium secondary cell was fabricated with composite material as cathode.

32. Results from the model show that at high current densities back diffusion of water from the cathode side of the membrane is insufficient to keep the membrane hydrated.

33. But whichever is adopted, we must make sure that the cathode lines can rise corona and balanced currents normally.

34. This is probably as good a point as anywhere in this tutorial to note a common mistake associated with the cathode bypass capacitor.

35. Cold cathode sensing tubes are more rugged than the glass, hot - filament tubes.

36. A new multiple hollow cathode sputtering target which has a simple structure and a high sputtering rate, was put forward.

37. The carbon fiber is the main reinforcer for titanium diboride coating material, and greatly influence the properties of titanium diboride coating cathode.

38. Currently conventional thermionic cathode electron gun cannot satisfy people's requirement for high lightness and long lifetime of electron gun.

39. Hot cathode chemical vapor deposition method was established in order to deposit high - quality diamond films highrate.

40. Then the cathode current density can be obtained from the processed emission current density distribution curve.

41. A cathode - ray - tube ( CRT ) faceplate made of transparent spinel ( MgAl 2 O 4 ) is developed.

42. The position and potential of the virtual cathode caused by space charge effects oscillate periodically.

43. The said arc source for multi-arc ion plating and diffusing apparatus includes tubular cathode target and magnet steel strips inside the tube[sentencedict .com], which are parallel to axis and rotate integrally.

44. A carbon nanotube cathode with high emission current has been fabricated with the screen printing method.

45. Its cathode end plate had the structure of no - flow field, air of cathode diffusion by the means of air-breathing .

46. Silicon power rectifier diode. Cathode to case. Peak reverse voltage 600V. Max forward current 30A.

47. In the process of copper electrolysis by the traditional method, good stating sheet product is a major premise and basis for producing copper cathode of high quality.

48. Reducing the corrosion of a metal by making the particular surface a cathode an electrochemical cell.

49. This paper analyzed the reasons and hazards of the saline alkaline crystal deposit in the hydrogen channel inside cathode chamber and introduced some elimination methods for it.

50. The phenomenon of large cathode emission current of diamond in a low electric field is reported, and the several emission mechanisms are summarized.

51. Ion, and the cathode surface active strengthening, also reduces the electrochemical polarization, cause crystallization coarsen.

52. This paper will briefly discuss the physical principle of measurement of cathode emission parameters of CPT and analyze the defective products.

53. The main object to control is the temperature distribution of the coke baked cathode and the air superfluity coefficient in the fume.

54. Brazing quality and product reliability are both increased as using high frequency pulse microplasma arc heating process for assembly brazing of cathode and photoetching grid of electron tube.

55. Silicon power rectifier diode. Cathode to case. Repetitive peak reverse voltage 800V. Average rectified forward current 25A.

56. During the activation and aging, the evaporation components and rates from 4.56:1.44:2 impregnated dispenser cathode have been determined by the vapor-collect method based on AES.

57. This current induces an azimuthal magnetic field (one that encircles the central cathode), which interacts with the same current that induced it to generate the thrust-producing Lorentz force.

58. This is the summarization of a virtual cathode radiation experiment on the EPA - 74 pulse-line accelerator .

59. Cathode rays are low-energy negative electrons produced in cathode ray tubes, also called television tubes or oscilloscopes.

60. According to the Laplace equation satisfied by the voltage distribution of inter-electrode gap in ECM, an algorithm of cathode design is presented in the paper, error adjusting method.