Random good picture Not show

31. The tunnel diode monostable circuit with non-linear biasing plays an important role in millimicrosecond pulse techniques.

32. When a backward biasing voltage is applied, the thickness of a depletion layer formed is made large, so that generation of hot carriers is minimized.

33. The numerical simulation indicates that, larger biasing current and smaller detuning expand the dynamic range of conversion efficiency and extinction ratio, but worsen the frequency chirp.

34. This common mode biasing can be achieved using the on-chip differential amplifiers, further reducing the external signal conditioning requirements.

35. A biasing member secured to the housing to bias the cutting edges against the stop member.

36. While the HVDC run in monopole to ground operation, Current in the earth make the transformer that have different potential bring DC magnetic biasing.

37. After select the most suitable topology structure of circuit , we simulate the biasing circuit , input and output matching circuit .

38. The mechanism of DC biasing for output transformer of SPWM switching converter was analyzed.

39. Animals have personalities, too. That may be biasing studies of them.

39. Sentencedict.com is a online sentence dictionary, on which you can find good sentences for a large number of words.

40. PPF can suppress switch's drop-out peak-voltage and magnetic biasing by adding a clamping capacitor on primary side of the traditional push-pull converter's transformer.

41. DC biasing can cause transformers noise increasing, vibration intensified, local overheating and even damaged.

42. Using a constant biasing current and a reduced output logic swing, current-steering logic avoids the large digital switching noise of conventional static CMOS logic.

43. Additional current can be achieved by previously biasing the extra capacitor, located inside each coil's secondary.

44. It requires careful biasing of the sync processing circuitry so that the sync pulse is made as distinguishable as possible from the other voltage levels within the video signal.

45. The integrated circuit receives a first signal from a microphone via a first node. In one embodiment, the integrated circuit comprises a biasing circuit and a buffering circuit.

46. This paper shows that under certain conditons it is possible to diminish and even eliminate the nonlinear distorsion of a peak envelope detector by biasing the diode adequately.

47. In this paper, a new method, biasing SH panels, was developed to improve the situation of flow velocity deviation of tangentially fired boiler horizontal gas pass.