Random good picture Not show

181) Plate bending by line heating is a main forming method for bi - curve shell plate in shipbuilding.

182) The formula for calculating the landing work, displacement at the wing tip, the shears and bending moments of the wing of a flexible airplane are also given.

183) The bending of the stems as a result of horizontal storage, might be caused by the anti-geotropism.

184) The technique of acoustic emission has been employed in the SENB bending test for the thermal damaged materials.

185) The application of bending pin mechanism for sequential demolding is effective for the stripping of hooked zone in the outshot part of the air conditioner current divider.

186) Some structures like boudin, rootless fold and thicken bending of the folds are visible.

187) In the point-supporting glass structures, the glass planes are supposed to bear both the bending load such as wind load and the shear load such as gravity.

188) It mainly comprises global affine transformation attack and local random bending attack.

189) In this paper, new method on calculation of absolute maximum bending moment and position is introduced(Sentence dictionary), and use influence line to check and compare to tradition method.

190) The wire - embedded aluminium pipes have cracked during the cold bending.

191) The reciprocal theorem is used to make research on the bending of a set square with free hypotenuse under a concentrated load acting at any of its points, and its accurate solution is given.

192) The empirical rules, which take into account the non neighbor interactions between the base pair steps, have been presented to predict the local bending of B DNA.

193) In order to enlarge the production scale, on cold bending production line was designed and manufactured.

194) The three-magnet bending system is suitable for linac beam deflection of free-electron-laser facility.

195) These outside conditions include environmental temperature, voltage, tensile stress, and bending load.

196) A split electrode piezoelectric composite suspension, based on the width bending mode, was designed for the dual stage servo system of rigid disk drive.

197) Absorption wavenumber and loss of stretching vibration and bending vibration of different quantum number were obtained.

198) The degree of chloride penetration in concrete under the bending load is quite different from that in zero-load state.

199) The reciprocal theorem is applied to research on the bending problem of set square with free hypoteuse and a clamped edge under uniform loads, the accurate solution of this problem is given.

200) Stadium rostrum above the rain awnings overhung 24 meters, the contour approximate to bending moment curve, three connected the lower deck spiral stairs, from the terraces layered overhung out.

201) The numerical examples illustrate that the wavelet based element has high analytical accuracy for beam bending problems with various boundary conditions and structures.

202) Shear force is implicit in the development of bending moments.

203) Formation of cold bending crack of EAF - CSP hot rolled strip was studied.

204) This article discusses the effects of friction coefficient fon the engagement efficiency of involute cylindrical gears and the bending stress of the dedendum.

205) AE parameters and strength of the electric ceramic materials under three-point bending load are studied.

206) A type of new progressive die including blanking, bending and forming is introduced.

207) Material: selected imports, high - density particle board, fiberboard, bending and strong.

208) Bending strength , compressive strength, interfacial bond strength and frost resistance are also studied and analyzed.

209) We assessed the predictive value of the fulcrum bending radiograph in the context of alternate-level pedicle screw fixation of the scoliotic spine.

210) Depending on the synthesizer it is used with, a wide range of effects such as dynamics, pitch bending, modulation, portamento, attack and decay times, can be controlled.