Similar words: penitent, penitence, impenitent, penitential, penitentiary, austere, syenite, exhauster. Meaning: n. a solid solution of ferric carbide or carbon in iron; cools to form pearlite or martensite.
Random good picture Not show
31. The requirement for retained austenite carburized or carbonitrided case will vary with the type of product.
32. Spheroidal austenite and acicular austenite can be seen during the austenitizing courses at low speed.
33. The morphology of austenite dendrites in shrinkage porosity in nodular iron is displayed by the color etching technique and the formation mechanism of shrinkage porosity has been analyzed.
34. The results show that, with the increase of holding temperature, the amount of bainite and retained austenite, the carbon concentration in retained austenite first increases and then decreases.
35. A simplified model of isothermal austenite grain growth has been developed.
36. Austenite nodular cast iron test block with different thickness were cast from different saturation and CE, and the saturation and CE were verified by microstructure and mechanical properties.
37. AlN precipitation at the full austenite grain boundary would worsen the ductility of the steels.
38. The surface hardness medium manganese austenite steel's is increased remarkably by using the casting surface alloy.
39. Effect of residual austenite on mechanical properties and abrasion resistance medium Mn white iron was investigated.
40. The results showed that severe twisting of vermicular graphite is caused not by the effects of modifying elements, but by the interaction of graphite and austenite.
41. Furthermore, precipitate of Nb in deformed austenite is more helpful for DEFT.
42. A new way to fine steel structure has been developed. It is the austenite - ferrite - repeating deformation.
43. Other than austenite, copper element dissolution is found in material.
44. These lath martensite first nucleates in parent austenite intergranular and twin boundary.
45. The surface hardness of medium manganese austenite steel's is increased remarkably by using the casting surface alloy.
46. For ferritic chromium steel, its thickness of layer is greater than that of austenite chromium steel.
47. The results show that austenite content is high and hardness is low as-cast condition.
48. The microstructures of duplex stainless steels consist of ferrite and austenite in approximately equal amounts.
49. The volume fraction and carbon content of retained austenite in the austempered high silicon cast steel after various austempering combinations were investigated by XRD method.
50. The test has been demonstrated that the boron segregation at austenite grain boundaries in quenched steel is a non-equilibrium grain boundary segregation phenomena occurred during cooling.
51. But Nb adding increases the under-heating austenite stability, reduces the temperature of phase transformation point and postpones the transformation of pearlite.
52. Therein, both retained austenite decomposition and carbides precipitation were the key factors in the cryo-treating process.
53. Meanwhile the initial strain rate and strain temperature affect the austenite grain size and distribution of precipitation phase.
54. The process investigation on hybrid YAG - MAG laser arc welding of austenite stainless steel is systematically developed.
55. In the present paper, both the process and new grain boundary of austenite recrystallized of 300M ultra high strength steel have been Oserved in-situ by means of high-temperature metalloscope and TEM.
56. The effect of chemical composition on mechanical properties of the austenite - bainite ( is other - tally quenched ) white iron was investigated.
57. The influence of anomalous scattering on austenite determination in steel by X - ray diffraction method was investigated.
58. High carbon steel will be gain a more amount of undissolved(remained) carbide and higher hardness when the steel is quenched with austenite of non homogeneous chemical composition.
59. The results showed that after the deformation of unrecrystallized austenite and quenching, martensite block width decreased and bent,[http://sentencedict.com/austenite.html] while the packet size increased to some extent.
60. Melting Residual Stress is the main factor Causing Stress erosion damage on Austenite Rustless Steel's Structures.
More similar words: penitent, penitence, impenitent, penitential, penitentiary, austere, syenite, exhauster, austerity, austerely, exhausted, austerlitz, unexhausted, whitening, exhaust system, finiteness, listen in, definiteness, infiniteness, western australia, fastening, listening, chastening, austerity measures, moistening, glistening, christening, sustenance, sustentation, genitourinary system.