Random good picture Not show

1. Scope: Sales thermosetting powder coating thermosetting powder coating.

2. This was mainly thermosetting plastic is too thick.

3. The reason is thermosetting plastic is too thick.

4. Apply to all parts of thermoplastic and thermosetting plastics.

5. Curing agent for thermosetting powder coatings.

6. Thermoplastic and thermosetting substances are called plastics.

7. A thermosetting resin composition comprising a polymer having a methylglycidyl group and an ultraviolet absorbent.

8. The curing process of thermosetting resin matrix composite materials involves complex mechanical, thermal and chemical reactions.

9. Polyester and acrylic acid is the most common thermosetting coating resin.

10. Epoxy asphalt concrete is a kind of special thermosetting material with outstanding road performances.

11. Epoxy resin as a typical representative of the thermosetting resin has been widely used because of its excellent properties.

12. Bakelite is a well - known thermosetting material and it has a wide variety of uses.

13. Microcapsule-type curing agent, method for producing the same, thermosetting resin composition, prepreg and fiber reinforced composite material.

14. Epoxy resin is a kind of thermosetting resin with excellent general performances, but its toughness is not enough.

15. The characteristic of thermosetting polyphenylene oxide resin copper clad laminates as wel as their application in the high frequency printed circuit board is introduced.

16. Thermosetting resin, obtained as reaction product from glycerol and phthalic acid.

17. Epoxy resin is a thermosetting resin with some good features including electrical properties, chemical stability, adhesive, processability and so on.

18. Molding process, equipment and die of thermosetting plastics for injection molding discussed in the paper.

19. Practice for Underground Installation of Flexible Reinforced Thermosetting Resin Pipe and Reinforced Plastic Mortar Pipe (08.

20. Alkyd resin: Thermosetting resin, obtained as reaction product from glycerol and phthalic acid.

21. For - laced nonwovens, the processes to improve the handling properties by after - finishing and thermosetting are introduced.

22. It is expected that this theory can be extended to other thermosetting resin systems cured by hardener.

23. Composite nitroamine propellant is composed of 70 % ~85 % nitroamine and 15 % ~30 % thermosetting binder.

24. The sand inclusion glass fiber reinforced plastic pipe takes thermosetting resin as base body(sentencedict.com/thermosetting.html), take glass fibre and its products as reinforced material.

25. As a substitute of cadmium red and chrome red, is a match environment red pigment. Used in thermoplastic resin, thermosetting resin, alkyd resin, rubber, other polymer and cement, coating.

26. A composite material, e. g. a metal impregnated with lubricant or a casting impregnated with thermosetting resin, can be obtained using the inventive vacuum high pressure filling equipment.

27. The phenol resins and plastics were the original synthetic thermosetting materials.

28. Attention was paid on how to lower the production costs in the processing of thermosetting plastics, which covered the fiber orientation, removal of burr and sprue runner material loss.

29. The electric heating air bag is used to heat and solidify thermosetting resin of the lining material added in the pipeline.

30. The protective coating on aluminium foils packaging for medicine was formulated with thermosetting acrylic resin, pyroxylin.