Random good picture Not show

(1) Inclined front face of Isolator to aid operator access.

(2) The conclusion is significant to optical isolator optimization designing.

(3) The semi-active isolation technique based on adjustable parameter isolator is a good choice.

(4) Passive Optical Device: WDM, attenuator, optical switch isolator , bandpass filter , modulator waveguide product.

(5) Designing vibration isolator between pump and its basis. Mainly discuss the two layers isolation to obtain the transmission function curves under different ratios of mass and damper.

(6) The basic principle of optical isolator and applications in optical fiber transmission systems are introduced.

(7) Each substation and overhead isolator will transmit real-time data to the control centers via an ABB telecommunications system using WLL (Wireless Local Loop) and UHF radio technology.

(8) The transmissibility of the isolator placed between a rigid body and a rigid base is analyzed by the use of the continuous system theory in this paper.

(9) Optical isolator with low insertion loss and minimized polarization mode dispersion.

(10) The development status quo and prospect of optical isolator are also discussed.

(11) For Faraday isolator[sentencedict .com], its performances are determined by magneto - optical crystals optical performances of the Faraday rotator.

(12) Kelly has several nuclear stations as customers for his isolators.

(13) The structure acoustic radiation caused by longitudinal vibration of shafting is reduced by changing excitation force propagation path and adopting vibration isolator or dynamic vibration absorber.

(14) The mathematical model is formulated by the way of vector and coordinate transformation in the linkage mechanism so as to derive kinematics modeling of irrotational displacement isolator.

(15) The model includes detector, management and decision - making center, isolator, and database.

(16) The signal of arc voltage without distortion is got by use of photo-coupled isolator 6N136 to insulate signal voltage from arc voltage.

(17) Vibration isolation is achieved conventionally by supporting a body on a vibration isolator.

(18) Multilayer circle metal plate damper ( MCMPD ) is a kind of new type isolator.

(19) Calculation is performed for the case that an optical isolator is inserted to suppress the DRB noise. Simulation results are given and the optimal position for the isolator is determined.

(20) The model incorporates the effect of fluid - structure interaction , response of equipment and isolator influence.

(21) In this paper, a novel hybrid passive component with a wavelength division multiplexer and a polarization insensitive optical isolator for an erbium doped amplifier is reported.

(22) Designed one kind of two stage wedge - type polarization independent optical isolator is designed.

(23) And three-dimensional sidewall compression inlet with 25 percent cowl position has high mass capture and total pressure recovery coefficient and isolator exit flow flied is homogeneous.

(24) The predicting methods of maximum pressure capability for constant area isolator were presented. The maximum pressure-isolator length relationship was also presented.

(25) Increaseing these precise parts'ability of anti - vibration and anti - shock through vibration isolator is the general method.

(26) This paper gives the designing requirement of an air spring rubber sac vibration isolator on the basis of analysing the vibration disturbing frequency spectrum.

(27) The paper introduces the time synchronization conception of the IRIG-B format code and its module constructions which include microprocessor, level converter and optically coupled isolator.

(28) In the paper , the nonlinear shock and vibration isolator by oil damping is the study object.

(29) Because of the all in one structure of laser diode optical isolator optical fiber, the usability of the module is increased greatly.

(30) With the method, the rays' lateral displacements, distance between two output rays and optical path difference can be computed precisely for a certain wedge type fiber optical isolator.