Random good picture Not show

1 Thus this chapter surveys the art of fluidization today.

2 These initial successes spawned much interest in fluidization.

3 Fluidization has had a rather turbulent history.

4 For satisfactory fluidization under these conditions an agitator is used in the bed.

5 Circulating fluidization of slender particles is applied widely in industry production.

6 This paper is dealt with the fluidization of cohesive particles under transverse rotating magnetic field.

7 By introducing the concept of fluidization factor,(www.Sentencedict.com) the required velocity at nozzle outlet starting to fluidize particulate material under different structural factor was obtained.

8 Based on the original definition of the critical fluidization velocity, a mathematical model was proposed to predict the first critical fluidization velocity.

9 However , the wastes can restraint fluidization of the bed materials.

10 According to gas velocity, gas-solid fluidization has been classified into low-speed riser,[sentencedict.com] cocurrent downer and pneumatic fluidization)in this paper.

11 Experimental investigation on fluidization , drying and heat transfer characteristics of gas - solid stirred fluidized bed was done.

12 With the increase of fluidization velocity, the solid circulation rate increases.

13 The experimental research on fluidization characteristic of waste tyre was done in a cold fluidized bed.

14 The effects of main operation parameters of fluidization long distance PTA farina conveying system on the conveying process and the design of it are introduced.

15 This paper introduces the application and superiority of fluidization technique in industrial production process of magnetic - particle.

16 Objective To observe efficacy of rhubarb and mirabilite on treating fatty fluidization in celiotomy incision.

17 Therefore, this characteristics reflect the assemblage of adularia-calcite is an inevitable product of the fluidization process from expanding, bubbling to slugging.

18 The properties of solid and fluid alone will determine whether smooth or bubbling fluidization occurs.

19 Thin strips of polymer which form on the reactor wall. Usually caused by poor fluidization or poor catalyst feed control.

20 The Leaching of germanium bearing smoke of zinc oxide in the particulate fluidization bed was investigated.

21 Described in the paper are the basic principles of metering techniques by the use of fluidization method and the automatic metering system employe...

22 A new type of sand storage silo with local fluidization and siphon discharging is recommended.

23 Abstract: TheLeaching ofgermanium - bearing smoke of zinc oxide inthe particulate fluidization bed was investigated.

24 According to the study on conventional fluidized bed, a correlation for predicting bed voidage at minimum fluidization and minimum fluidization velocity, giving agreement with experi.

25 A comparison of VFB and CFB indicates that VFB has lower minimum fluidization velocity, higher bed voidage and more steady fluidization because big bubbles can not be formed in the bed.

26 The effect of agglomerated conditions, such as amount of additive, fluidization ratio, and amount of water on rate of wear of agglomerated fly ash was also studied.

27 A method for the preparation of silicon nitride powder by a direct nitridation process based on fluidization technology is described.

28 In this paper , a Gas Solid Solid Circulating Fluidization Reactor ( GSSCFR ) is studied.