Random good picture Not show

91. A study of the grafted copolymerization of potato starch with butyl acrylate as comonomer, and APS as initiator by microwave radiation has been mode.

92. The effect of butyl acrylate ( BA ) dosage on adhesive was investigated.

93. A series of acrylamide- tetradecyl acrylate copolymer nickel complexes were synthesized.

94. Reversed - phase precipitation; gas chromatography; methanol; residual monomer; silicone acrylate resin.

95. Influnce of molecular structure of organopolysiloxane on properties of silicone acrylate emulsion was discussed.

96. Reaction behavior of the acrylic and the cyclic double bond of dicyclopentadienyl acrylate(DCPA) during and after UV curing were investigated by Fourier-Transform-infrared ray(FT-IR).

97. In this paper the synthetic method of the copolymerization emulsion of VAC - acrylate was briefly introduced.

98. The preparation of waterborne acrylate hydrosol, which is stable in acidic or alkaline environments, is introduced.

99. The in-situ preparation of zinc methylacrylate or zinc acrylate through mixing zinc oxide(ZnO) and methylacrylic acid (MAA)or acrylic acid(AA) in NBR rubber vulcanized with peroxide was studied.

100. A novel UV curable polysilicone urethane acrylate(PSUA) was synthesized from isophorone diisocyanate(IPDI), hydroxyethyl acrylate(HEA) and hydroxyl-terminated polysilicone(K-50).

101. The emulsion polymerization was used to copolymerize the hexafluorobutyl acrylate monomer, and other acrylic monomers in order to obtain a stable emulsion.

102. Silicone - acrylic resin is made of silicorie, acrylic acid and acrylate in different ways.

103. A low dielectric material, acrylate resin has been investigated as a passivation dielectric layer for thin-film transistor (TFT) arrays in this paper.

104. A new water developable, photosensitive phenolic resin containing quaternary ammonium hydroxide groups and acrylate groups(AQHPR) was synthesized.

105. The self - crosslinking acrylate printing adhesive was synthesized by emulsion polymerization.

106. The methyl acrylate emulsion was prepared in the anionic polyurethane emulsion.

107. Additive compound of dipentene and methyl acrylate is a kind of new excellent non-colour transparent essence of white lemon.

108. A non - formaldehyde self - cross - linking acrylate binder has been prepared by seed emulsion polymerization.

109. The coating is composed of styrene - acrylate emulsion, acid modified water glass and stain - resistant agent.

110. At first, acrylate polymers used for modifying POM was prepared via emulsion polymerization i.

111. And acrylate is of better functions for aluminum powder to delaminate and felt at room temperature.

112. Its catalytic performance in Heck reaction of iodobenzene with ethyl acrylate was studied.

113. The result of performance test showed that the maleic anhydride and polyethylene glycol 400 monoester was the best to improve the viscosity of epoxy acrylate and the best mule ratio was 0.1.

114. The UV curable coating of fiber ribbon was prepared by blending bisphenol A epoxy acrylate(EA) and polyurethane acrylate(PUA)and adding reactive diluent,(www.Sentencedict.com) photoinitiator and pigment.

115. In this paper, acrylate resin and its excellent properties were introduced.

116. The preparation method and performance of a new type of alcohol-soluble acrylate adhesive modified by epoxy resin for dry laminating film are introduced.

117. In the polymerization system, highly oil- absorbing porous copolymer of butyl methacrylate and(2-ethyl hexyl)acrylate was prepared by suspention polymerization in inert solvents.

118. The method takes n-butyl acrylate and glycidyl methacrylate as raw materials to prepare an active toughener in solution through a copolymerization reaction.