Random good picture Not show

61. Distributing quality will effect directly allumage condition; of charge level, consumption of coal gas and burn-up of solid, and will effect the quality of finished sintering ore product.

62. Through the comprehensive evaluation of magnesium solvent in sintering, the magnesian lime was used to replace the dolomite powder as new extracting magnesium sintering solvent in the production.

63. The technologies of sintering, composite coating, punching plunger extruding, cold stretch and hot shrinkage, supercritical CO2-assisted extruding for PTFE are introduced.

64. Near the burning through point, the absorption of SO2 by the sintering bed disappears and the decomposability of SO2 strengthens, leading to the rapid increase of SO2 content.

65. The reasons causing low production of the sintering Machine and several measures adopted are introduced.

66. Methods for the preparation of nano-ceramics including the preparation, molding and sintering of nano-ceramic powders are introduced in the paper.

67. The sintering temperature and thermal expansion coefficient of the LSGM sample were determined using dilatometer.

68. The electroformed and sintering double and single-tube bit , core bit , reamer and other geoexploration tools widely applied in electic power plant, bridge, mine and high- rise buildings and so on .

69. The results showed that the density of the plates was in graded distribution in the moving direction of samples during sintering.

70. The hackle screens are mainly used in the shaking screen classification attachments that are in iron-smelting plants and sintering ones of metallurgical industry.

71. The sintering process is the heart of the preparing process of coal ganguethermal insulation material.

72. Temperature effect on the desulfurization of sintering process is investigated by mini-sintering test.

73. The effect of electrocast zirconia and monocline zirconia and two types of binders(anhydrous and un-hydroxyl resin and liquid paraffin)on the sintering of fired magnesia-calcia brick are investigated.

74. And sintering temperature has an important effect on the initial permeability of Mn-Zn ferrites.

75. The paper described the quantitative analysis of the law of sintering raw material and chamotte index wave Caused by the ash content.

76. Wetter was found to be a key to coating preparation. It not only wetted and dispersed metal powder but also acted as reductor during the period of sintering.

77. A ternary boride cermet clad material was fabricated on the Q235 steel substrate by means of the vacuum liquid phase sintering technique.

78. The rare-earth lithium power battery adopts positive-pole materials which are made exclusively through sintering of the doped rare-earth element.

79. Indirect selective laser sintering of silica sand have been studied by experiment. The mechanism of laser sintering silica sand is obtained by observing the microstructure of sintered sample.

80. A series of sintering experiments with different heating rates are carried out in dilatometer for the alumina green parts shaped by powder injection molding and debinding.

81. As substitution of diopside for talc,(http://sentencedict.com/sintering.html) the body has lower firing temperature and widening sintering range. The property of diopside porcelain is in keeping with standard of high frequence dielectric.

82. After sintering of high temperature, the graphitization degree of both carbon slide materials is improved.

83. The intensification of immiscible element in this process is the key to realize uniformization sintering and reach a higher shrinkage ratio.

84. The production technology and process of large-scale titanium filter plate are introduced. Some attentive matter such as molding, sintering, welding and machining process are proposed.

85. Conditions for the low-temperature sintering technology and formation of acicular calcium ferrite have been found in laboratory test. The process has achieved success in industrial test as well.

86. The variation rule of the vertical sintering speed with proceeding of sintering was investigated through the research of the air speed.

87. Resin fortning agent diamond commonly formed by sintering with polyimide resin and phenolic resin.

88. So the thermodynamics feasibility of reverse reaction sintering is demonstrated.

89. The high sintering temperature and machining cost are the two key obstacles to enlarge zirconia toughening ceramics as dental prosthetic.

90. The improvment on the sealing device of ANGANG 105 m 2 sintering machine and its effect were described.