Random good picture Not show

1. Sintering usually leads to a reduction in mass with pores becoming more spherical or being eliminated.

2. The rate at which solid state sintering occurs is approximately inversely proportional to the particle size involved.

3. The grains then soften at their points of con-tact and fuse together, a process called sintering.

4. Study on Application of Wollastonite in Sintered Welding Flux.

5. Sintered NdFeB permanent magnetic material has outstanding magnetic properties.

6. The forming process of selective laser sintered resin coated sand cores includes two steps which are selective laser sintering and post-curing.

7. Firstly, the sintered metal porous material is determined be used for rectifying tube after the experiment comparison of 4 types and 6 kinds of porous materials.

8. The fracture mode of SPS sintered molybdenum belongs to brittle intercrystalline fracture.

9. The corrosion behavior of sintered NdFeB in acid, acid, vitriol, phosphate and acid was studied.

10. The strengthening mechanism of rare earth element in sintered copper molybdenum steel has been studied.

11. The sintered shrinkage was an important factor to choose the composition.

12. Sintered gas sensors made from bismuth molybdate doped with cobalt have a high sensitivity and selectivity to reducing gases such as ethanol. And insensitivity to butane and carbon monoxide.

13. The nonlinear magnetic property of low temperature sintered Y - type ferroxplana was reported.

13. Wish you can benefit from our online sentence dictionary and make progress day by day!

14. The influence of rare earth element on the properties of sintered copper molybdenum steel has been studied.

15. The relationship between dielectricrelaxation character and structural ordering of the sintered PSN ferroelectric cera - mics was investigated.

16. Therefore, the influence of fly ash on high added fly ash batch forming property, green body strength, forming quality and porous brick sintered strength is analyzed.

17. The CeO 2 - x films were deposited from a sintered CeO 2 - x.

18. The technology has been explorated, in which brass was used as the core plate of copper- base sintered friction sheet, and the changing case during its sintering was examined.

19. On the beam a kind of Ruthenat thick film resistor paste is printed and sintered as the strain resistor.

20. It is made of high quality low-carbon steel, and sintered and rolled copper alloy as its surface. It has high fatigue strength, lord capacity and impact strength.

21. The utility model discloses an anti-pressure sample shaping machine for sintered ordinary brisk, which includes a base-board and a top-board.

22. For some applications, especially where extremely high-speed cutting is important, other tool materials such as sintered carbide products are a more economical alternative to tool steel.

23. Hydrogen is shown as one of the main sources of the interfacial embrittlement of as - sintered specimen.

24. The results show: the better crystalline powder were formed using oxalic acid as a coprecipitator, sintered ceramics had higher density and also with well homogeneity for resistivity and B value.

25. The coke and sulfur on the catalysts has been removed effectively and active metals are not sintered on the catalyst surface after regeneration.

26. Also[sentencedict.com], the distribution of grain size tends to widen with the density of the sintered product.

27. Second , the polycrystal Mo with the orientation of (110) made with high purity sintered and arc-melting Mo was prepared by the method of electron beam floating zone melting without a seed.

28. It is made of high quality low-carbon steel, and sintered and rolled copper alloy as its surface. It has high fatigue strength, load capacity and impact strength.

29. This paper introduces the industrial-scale experiment of carbon ferrochrome manufacture with sintered chromite.

30. But the addition of SM master alloy has some deleterious effect on the toughness of sintered steel.