Random good picture Not show

1. Others strengthened weak hands by molding clay.

2. Experts say most cases of positional molding happen at or before birth and get better on their own.

3. Uses the import molding tool steel vacuum treated.

4. Remove liftgate opening ( headliner ) upper trim molding.

5. Work in coordination with the Molding Supervisors, assuring quality.

6. It's curing temperature high and difficult to molding.

7. Install beltline molding and weatherstrip seals.

8. Install, set up, troubleshoot and start up molding machines, as well as secondary and auxiliary equipment.

8. Sentencedict.com try its best to collect and build good sentences.

9. Objective To establish the best molding technics of Biyan Tablets, a patent traditional Chinese prescription for rhinitis, and to improve the hardness of the core in coaling.

10. Using molding methods to produce small aspherical elements is the best economic way with the best repetitiveness.

11. A projection television (TV) and a mold for molding a cabinet of the same are capable of reducing the number of parts and simplifying a production process.

12. In the technology of fiber placement molding , it is main to use the assembly of placement delivery head.

13. The molding sand that there is pile in the housing of engine and cast core iron.

14. I tried molding the pulleys (the step pulley and 6" pulley) in sand but after the 12th or 13th failed attempt I was ready to put the damn patterns on the countershaft and go with that!"

15. Material is cementsandcoal dust high pressure molding need not sinter. The product with good strength colourful.

16. Bodacious and Bonemeal chewed rawhide strips the size of ceiling molding.

17. Floors and columns were painted to look like marble, and 24-karat gold leaf was applied on molding.

18. He wants to control what information the public gets in the hopes of molding public opinion if and when it is needed.

19. In the first place, it is pointed out defects of national standard metal molding tension test specimen for casting aluminum alloy in this paper.

20. The resista nce decreases intensely when the slenderness ratio of the hot molding sand layer increases.

21. The materials, gas channel design and mould design of Gas - Assisted Injection Molding were primarily introduced.

22. In the production of electrolytic aluminum the aluminum holding furnace is one major molding device.

23. The work principle of double insurance level switch, float design, mold design and steam foaming molding technology are introduced.

24. Improved injector nozzles seal off better to keep the process leak - free and the molding operation dry.

25. A specially-designed addition agent is used instead of coal dust in green molding sand for the trial production of impact molding line made by GF company.

26. But this problem will be settled preferably by using the air-stream and synchro-formed clamp plate impact molding.

27. Fabrication process of polymer microlens arrays is introduced based on soft lithographic UV - molding replication method.

28. This paper deals with a measuring method and tester for the three properties of molding sand.

29. Polyether imide is a suitable plastic material for forming the substrate plate. A suitable molding process is injection molding, wherein a highly polished mold is used.

30. Therefore, the two color and two taste hard candy molding apparatus is formed, and the two color and two taste candy molding apparatus can produce hard candies with two colors and tastes.