Random good picture Not show

(31) Analyze interface condition of the two contact surfaces, secondary contact phenomenon, existence of meshing boundary line and undercut boundary line.

(32) In order to reduce the probability of failure, the influence of a gearwheel with staggering tooth on the meshing stiffness of gear with double circular arc was investigated.

(33) First of all, the excitations of gearing including stiffness excitation, error excitation and meshing shock excitation are simulated by finite element method and error equivalent method.

(34) The ways to reduce the fatigue wear-off due to meshing teeth faces under different working conditions are found out via the mathematical model describing the physical process of tooth face wear-off.

(35) When the meshing efficiency of closed epicyclic gear trains is computed, the method of drive-ratio is used often.

(36) Gear manufacturing error will directly affect the meshing of gears, thereby affecting the smooth movement of.

(37) Within the range of machining, if the helix angle adopts a bigger value, it may improve the meshing performance and develop the advantages of double enveloping TI worm gearing.

(38) In this paper, a new method to measure meshing composite deflections of loaded cylindrical involute helical gear by using high precision clinometer is presented.

(39) According to the theory of gearing, equation of the meshing line can be deduced from the tooth profile of basic rack.

(40) A brick element re - meshing technique was presented for shape - metal rolling process.

(41) The character of special master gear wear for gear meshing and seperating technique is studied in this paper.

(42) PPTA (polyphenylene terephthalamide) pulp was prepared by semi-continuous direct polycondensation using a co-current rotating and meshing twin screw extruder as main reactor.

(43) Threshold rattling speed not only depends upon the frequency and amplitude of the errors of a gear pair, but also time-varying meshing stiffness and their combination frequency.

(44) Meshing parameters in harmonic gear drive are optimized in the paper.

(45) In addition, when roller gear when no meshing clearance between generates this kind of gear poles.

(46) There were some beautiful harmonies meshing behind the dreamy bass line.

(47) These formulae are suitable for any contacting point of tooth surface meshing.

(48) The line of contact is longer and the contact ratio is bigger, the meshing stationarity is good.

(49) According to Hertzian stress, the stiffness during the contact of a pair of gear teeth is derived, and the variation of stiffness is introduced into the rack-and-pinion meshing model.

(50) In the meshing of the German constitution with European law, proportionality provides a lubricant.

(51) Three meshing points the tooth surface were designed according to the contact pattern and transmission errors.

(52) It is an important but difficult job to compute the transmission ratio and the meshing efficiency of epicyclic gear trains.

(53) Toothed ball meshing, compact structure, rational design,[sentencedict .com] achieving the mechanical transmission precision requirements.

(54) This paper also presents an iterative method to find the initial gap between meshing local conjugate teeth.

(55) This paper makes a meshing analysis about the spiroid gearing. Using the method of equivalent worm gearing, the assembly condition of Archimedes spiroid gears has been obtained.

(56) Meshing to minish analysis error is a concerned problem in FEA.

(57) A new type of arc cycloidal internal meshing rotary pump was studied.

(58) A new method is proposed for analysing the meshing force exerted between the pin teeth and the cycloidal gear teeth in the course of the cycloidal pin gear epicyclic transmission.

(59) The modification of gear is a principal method for improving performance meshing.

(60) It is a general issue that the meshing force between the gears in the rolling mill herringbone gear stand is not sufficient.