Random good picture Not show

91. The protective atmosphere is very important during laser cladding process.

92. Launch scratch test indicate under most big load function of 100N, cladding layer combine substrate well, there are no stripping and avalanche phenomenon.

93. The bioceramic coating by laser cladding has high bonding strength and e.

94. Recycled materials include aluminium cladding, cotton insulation and steel with recycled content.

95. With the measuring system equipped with a microchip solid laser and a unique refractive index matching cladding mode filter, the transmission loss of a double clad fiber laser was measured.

96. The preparation of ternary boride hard alloy cladding layer on steel substrate is studied.

97. It is shown by comparison of properties of various conducting wires that Al cladding steel wire have good properties in respects of corrosion resistance, conductibility , tensile strength and etc.

98. A calculation model is proposed for explosive cladding of steel billet.

99. Though the lasers with lattice-mismatch cladding layers still have low threshold current density, the gain is too small to support ground state lasing .

100. The process makes stainless steel cladding very thin to reduce material cost.

101. Ternary boride based cermet cladding material was prepared by in situ reaction and liquid phase sintering technology in vacuum furnace.

102. The processing and properties of copper-clad steel wire produced by pipe - weld cladding technique were studied.

103. Graphic form the building cladding folk paper - cut art from Poland.

104. The deposited ferritic weld metal shall not contact the austenitic or high - chromium steel cladding.

105. Laser refabrication is a kind of new green reconstruction technology that based on laser cladding.

106. The failed fuel assembly identification system is an important safety system which ensures safe operations of reactor and immediate treatment of failed fuel rod cladding.

107. This paper has some significance for the study of laser cladding bioceramic coatings.

108. Pressurized water reactor fuel performance problems connected with fuel cladding corrosion processes.

109. It aims to realize the laser quenching and cladding for the principle axis and crank of single or more crank while the crankshaft is laid horizontally and rotating around the principal axis.

110. M5 alloy was a new zirconium alloy used in high burn up assembly such as fuel cladding, end plug, guide tube and grid spring and so on.

111. In this paper are introduced and discussed the ways and study results of metallizing cladding onto diamond to raise diamond tool's working effect.

112. So far the first barrier, which is the fuel cladding, has apparently failed[sentencedict.com/cladding.html], because they are detecting cesium.

113. Computers were connected to the Ethernet cable through "taps, " where a hole is punched through the coax cladding and the outer conductor so a connection can be made to the inner conductor.

114. The paper finds that the fatigue life of laser cladding submit the logarithmic normal distribution.

115. Zirconium-base alloys are used primarily as fuel cladding material and other core structure material in water cooled nuclear power reactors.