Random good picture Not show

1) Initially these alloys were austenitic.

2) Measuring static austenitic recrystallization by Back extrapolation method.

3) Wetted parts: All Austenitic Stainless Steel and Stellite 6.

4) This procedure creates a homogeneous austenitic microstructure.

5) The microstructure of weld joint consists of austenitic matrix,[http://sentencedict.com/austenitic.html] columnar crystal in the form of V shape close to the fusion line and fine equiaxed austenite in the centre.

6) The modified austenitic manganese steel is suited for the operating condition of impact-corrosive wear, chisel-cutting wear and high stress wear.

7) The low temperature fracture mechanism of high manganese austenitic steels is studied.

8) RA330 is an austenitic heat and corrosion resisting alloy offering an exceptional combination of strength and resistance to carburization, oxidation and thermal shock.

9) This paper deals with various technics of Austenitic, and meanwhile indicates the principles of their formation.

10) This report given an introduction on technology of austenitic stainless steel drilling by ordinary radial drilling machine.

11) This report given an introduction on technology of austenitic steel drilling by ordinary radial drilling machine.

12) Plasma nitriding of AISI 316 austenitic stainless steel in the condition of chromium ion immersion.

13) Stainless steel comprised austenitic and ferretic stainless steels that contain high amounts of chromium and nickel.

14) Austenitic Stainless Steel is a Ni - Cr - Mo stainless steel in the AISI Type 316 category.

15) The technology for tightness improvement of the Ni austenitic cast iron cable head is studied.

16) As a result , austenitic stainless steels are inapplicable in seawater environment.

17) S tube valves are cast into shape with austenitic manganese steel, the quick wearing surface is welded with wear-resistant material, has the dual advantages of anti-high pressure and anti-wearing.

18) Nitrogen alloyed austenitic steels showed excellent ballistic property, higher than that of martensite steel.

19) Austenitic type stainless steel heat treatment of acid - resistant.

20) Cold deformation can effectively enhance the strength of austenitic stainless steels.

21) The change in strength of cryogenic austenitic steel with temperature and alloying element content was studied.

22) RPP Milling, turning, planning of cast iron, annealed cast iron, steel, austenitic steel.

23) The strength, toughness and surface hardness of medium Manganese austenitic steel have been increased greatly by casting surface alloying and complex modification.

24) This type of tips has presented a good wear resistance equal to that of typical cemented carbides YG6 tips when cutting austenitic stainless steel, nodular cast iron and chilled cast iron.

25) The recent advances of research of wear resistant steel including austenitic manganese steel, low alloy martensitic steel and bainitic steel are summarized in this paper.

26) In this paper the effect of alloyed modification for carbon content, carbide shape and distribution in austenitic manganese steel has been studied.

27) The results show that a compound layer with good wear-resistance and corrosion resistance can be gained in 304 austenitic steel by chromizing sbusequent solid soluti...

28) Most cast iron has curie point at about 1 040K except austenitic cast iron and white cast iron, their thermal diffusivity is the minimum there.

29) The extra-cryogenic impact toughness and influence factors of the high-Mn austenitic steel are studied by means of the Charpy V-notch impact test and the SEM fractured appearance analysis.

30) The effect of nitrogen, carbon and manganese on mechanical properties and work-hardening ability metastable austenitic manganese steel was studied.