Random good picture Not show

1. A solid wood stem and mahogany floors and stiffeners complete the basic construction which has been particularly cleanly executed by West Custom.

2. This shows the small blocks glued to the stiffener.

3. This shows the stiffener glued to the disc.

4. The proposed rebar stiffener was found to be very effective in improving the static behavior of the composite connections.

5. Bulwark plate to be thickened and stiffener to be added in way of mooring hole.

6. Next, apply a second coat to both the stiffener and the disc, let them dry for a few minutes, and then press together.

7. Cut a small section of scrap stiffener, slip it behind the spokes, and draw in the stiffener area.

8. Effects of column axial force and rib stiffener on hysteretic behavior of connections were synthetically considered for the first time during cyclic-loading.

9. Prepare a finite element model of the bend stiffener and the umbilical and apply the loads specified in the second step.

10. Taken the lateral flexural rigidity of stiffener, the flexural rigidity in its plane and the torsional rigidity into consideration.

10. Sentencedict.com try its best to collect and make good sentences.

11. The shank is a stiffener that controls the flexibility of the sole.

12. Choose an appropriate thickness for the stiffener and spacer blocks to fit the rim width.

13. The optimum position of a longitudinal stiffener as well as an approximate expression for computing the critical rigidity of the stiffener have been presented for design reference.

14. The excess slightly beyond the stiffener will be trimmed off later.

15. The raft shifted uneasily on the sea, the bamboo stiffeners in the sails clattering on the masts.

16. The factors which influenced the stability of steel - lined reinforced concrete pipe with stiffener rings are discussed.

17. One of the repair profiles (E_D4R6) is applied to the connection of a lug plate and the longitudinal stiffener, to calculate the maximum principal stress after crack removal.

18. During the process of calculation, the relative ubiety between impactive location and stiffener is taken into account.

19. There is a vertical waterproof longitudinal bulkhead between the two shell-junctures, it reinforced by some stiffener.

20. The failure mechanisms and the loading capacity of stiffened composite panels with stiffener runout are studied.

21. Leave the foam on the wheel and mark the area where the stiffener will go.

22. The comparison of numerical results and experimental data shows that the cohesive element based model can simulate the propagation of delamination initiated at the stiffener runout.

23. Using the programmable controller in the automobile rear axle house ring stiffener, logic sequential control was realized in the top plate automatic welding craft.

24. This indicated that the fracture had initiated at the unfused butt weld in the longitudinal stiffener.

25. In the analysis of the elastic tripping of the stiffener, the critical stress under this mode of failure is derived by using the energy method and the principle of least potential energy.