Random good picture Not show

1. The girder is square in cross-section.

2. There was blood on the girder where Gazzer's hands were sliding helplessly down ....

3. A girder is a beam that supports other beams or is made up of separate beams joined together.

4. Daak had stopped half-way up the girder and, holding on with one hand, was flailing the air with his chainsword.

5. A wrought-iron girder swing bridge at the Northern Entrance Lock may be the original installed by Brunel.

6. The longitudinal girder forms part of the parapets.

7. The girder is braced against an erection bracket.

8. A steel girder may warp in a fire.

9. A two-span continuous curved box girder model was made with Perspex.

10. Now, the segment girders are used more and more. Guangzhou metro first use the segment girder technology cosmically in urban railway traffic, obtain primary fruit.

11. Main diseases and reinforcement method of current box girder web plate are discussed, after years of service.

12. Most often this involved a segment of a girder web.

13. Analysis is made on the formations of wave girder hot-dipped galvanization disfigurement, resulting from silicium and ferrum, and provided the preventions.

14. As the train approaches a junction, a second bottom girder supports the train on both sides.

15. When the neighbouring Skerne Ironworks closed in 1879, Wilson's decided to expand into the empty bridge girder manufacturing market.

16. It went on a line into the stands and hit the same upright girder.

17. The lower props are horizontal; the topmost prop is curved to follow the line of the girder.

18. They would strengthen the bridge without making major changes in the steel girder system above that might look out of place.

19. Above it, is a cloud so dense it appears to be like a girder, half of it molten.

20. Based on the elastic concept this paper proposes the chart analysis method for estimation of seismic response of the selfanchored suspension cable bridge with steel box stiffening girder.

21. This paper has introduced how to use the graph theory method to calculate the sectorial coordinate of the variable cross-section box girder.

22. Comparison between experimental and computed results proved the effectiveness of this analytical method in the three-dimensional analysis of skew box girder bridges.

23. Some suggestions of cantilever installation of steel box shaped girder are given.

23. Sentencedict.com is a online sentence dictionary, on which you can find good sentences for a large number of words.

24. Based on construction examples, this paper introduces the calculating method of steel strands length and bend up angle of skew box girder.

25. In recent years some new profile steels are used for main girder of domestic made electric single girder overhead travelling crane.

26. In order to evaluate correctly the bearing capacity of one grade separation bridge, the field static load test of an unbonded prestressed concrete box girder in the bridge was carried out.

27. Electric Motor Grab: Equipped a winding structure on the deck girder and taking the winding wire rope as the closed rope, It can work as a long stay bar grab...

28. The boundary conditions of the fixed end of the box girder are discussed and an illustrative example is hereby given.

29. This paper presents a method that the reasonable inclined cable forces during the construction process are determined by the target configuration of girder.

30. So it is necessary to do some further researches in thin-walled box girder, especially in multichambered thin wall box girder.