Random good picture Not show

61. From the comparison of the fiber lengths, the pump power and the gain flatness for same gain of FRA, that DCF have been chosen as the active medium of LRA.

62. The thesis contains following main parts: (1) the intrinsic flatness of disk galaxies has been statistically analyzed based on 14,988 disk galaxies taken from the LEDA database.

63. By using this method, not only overelaborate drawing and hand-calculating can be avoided, but also the flatness of four kinds of datum-planes can be assessed quickly and precisely.

64. This distressing feeling is caused by the flatness of life and the lack of passion. However, it cannot be simply explained by human nature of insatiability.

65. Suitable for single - firing in - door wall tiles, good whiteness , luminance and flatness.

66. The ground should be solid flatness, the pump put should steady really.

67. In the aspect of general analysis, the study includes the calculation model, the postposition flatness of bearing-time sequence and the simulation evaluation of tracking.

68. After cooling, during the sorting phase, the tiles'dimension and flatness are checked by electronic equipment.

69. This instrument can also measure the refractive-index homogeneity, the flatness, the angle error, the wedge angle of crystal element.

70. The Fast Fourier Transform ( FFT ) is applied to spectral analysis of flatness measurement.

71. Briefly analyzing the basic method to control the flatness and brings up a new technology by using the tension distribution control technology to fulfill the control of the profile.

72. The products should be packed with wooden pallets or carton, stored in flatness andand unloaded carefully.

73. Japanese wood-block prints, with their curved lines, patterned surfaces, contrasting voids, and flatness of visual plane, also inspired Art Nouveau.

74. According to the definition of the minimum zone method, the mathematical model is presented for evaluating flatness error and establishing datum plane equation.

75. The base paper board should have a higher stiffness, lower MD/CD strength ratio, uniform surface density, higher surface flatness and desirable sizing for higher water resistance capacity.

76. A novel in - situ non - flatness measurement method wafer chuck in step - and - scan projection lithographic tool is presented.

77. The process of automatic flatness control and automatic gauge control(AFC-AGC) is a nonlinear system with strong coupling and pure time delay.

78. Gain performance of single channel EDFA is studied for multi-channel operation. The optimum gain flatness for multi-channel operation can be obtained by optimizing EDF parameters.

79. The equalizer isn't used because the gain flatness of amplifier is close to the requirement.

80. Through the rail flatness inspection[Sentence dictionary], the causes for waviness are found.

81. Internal Reinforcement- The leading and back edge of door are internally reinforced with tubular steel to ensure flatness and strengthen the door panel.

82. A straightedge provides a standard of straightness by comparison with which the straightness and flatness of a surface can be inspected .

83. This paper introduces the optical interference and its theory and application on the inspection of high precision flatness of the seal-face of floating end-face seal rings.

84. The plasticity stretching can ensures the flatness of the sloping wall.