Random good picture Not show

31. The starting curve and size of the die were already designed according to the rheological theory and then corrected with the extruding experiments.

32. The extruding machine for iron scrap is a special equipments which is used to squeeze iron, steel and aluminum scraps produced from the CNC lathe to a solid piece for quick conveyance.

33. Program to create a cylinder and a parallelepiped by extruding a circle and quadrilateral respectively.

34. The machine is a special equipment for extruding two-component polysulfide sealant and two-component copper silicon for manufacturing aluminum-frame type insulated glass.

35. This line is applicable to the continuous extruding of PVC door plate elbow board and floorboard.

36. The unit pressure in backward extruding hollow billet has been calculated by the slip line method and the upper bound method.

37. One presented herniary contents extruding from the middle part of a self made cone shaped mesh.

38. The technologies of sintering, composite coating, punching plunger extruding, cold stretch and hot shrinkage, supercritical CO2-assisted extruding for PTFE are introduced.

39. SJSZ series conic twin - screw extruder is professional equipment for extruding kinds of PVC powder.

40. The antibacterial anti-ultraviolet compound function health fiber uses compound function health fiber master batches and is made through melting and extruding spinning in a high speed.

41. Extruding of water power increases the speed of gas scattering, which makes gas fully release, reduce the gas pressure goes beyond the limit and have remarkable effect to safety production.

42. In the extruding process, vesicant is injected at high pressure.

43. Mixer, extruding machine, double screw rod extruding machine , breaker, sheeting breaker(sentencedict .com), pulverizer.

44. Under the help of the end resistance of multi-under- extruding branches and the skin friction of pile, the bearing capacity of single DX-pile is increased.

45. The driving direction of the oil cylinder (5) is parallel to the connecting line of shaft centers of the air extruding roller (2) and the double-layer roll combining roller (1).

46. A kind of soup was made from bitter buckwheat and sesame through extruding, blending and grinding. The product features light yellow color, faint scent, good edibility and rich nutrition.

47. In this paper, the reinforced thermoplastic starch(TPS)materials were obtained by extruding the mixture of TPS and copolyamide with a single scerw extruder.

48. In this paper, the design principle and applicable range of the pile of extruding breakstone are introduced.

49. Do a research of ten kinds of failure forms of a cold extruding punch terrace die for a smelting steeliness automobile piston.

50. Combined with the former experiment for solid conveying zone and melting zone, the torque for extruding zone was obtained.

51. We are also capable to design and make the extruding mould, metal die-casting, punching, pressing, extruding, grinding, lathing, plastic inject, blowing etc.

52. Flat container is the most important tool for extruding large thin - wall Aluminum wainscot.

53. Taking cylinder nut-protected bolt, one of the cup-shaped parts in the forging parts of DF7C gas engine, as an example, the warm extruding is researched, accordingly, the forming die is designed.

54. The calculating results showed that the optimized geometry of soldering fillet is a concave shape in which the extruding length of the soldering fillet is a little more than the gap height.

55. With the die set fro the multiway die forging developed by the authors, only one stroke of the crank-shaft press is needed for extruding a heated block into a precision forging of a pipe joint.

56. The machine is mainly used for extruding 45 ? ? seam aluminium window of angle joint structure.

57. The flat container is important tool for extruding large - sized aluminum wallboard.

58. This article introduced the experiment of residual stress in flat tubeplate head of large scale fuel boiler that was manufactured by cold rotary extruding and butt weld.

59. Extruding parts, mortars and cement soils adhering on cement surface, oil and water, or too smooth surface should be removed or treated with abrader machines or bench grinders.

60. The technology and the die design of cold extruding for the electric hammer drill is described.