Random good picture Not show

61. The rationality of existing a critical height for jet nozzle found in experiment was analyzed theoretically.

62. The SW Sidewinder Flat Flame burner is a nozzle mix excess air burner designed for radiation heating.

63. Use easily due to adoption of squeezable bottle with fine tip nozzle.

64. From the experimental results the effects of nozzle axial position and mixer tube length upon ejector characteristic are revealed .

65. Meanwhile, some problems occur, one of resolvent is to add nozzle width.

66. Detail Make of acrylic board , Top Sprinkling, towel rack, Nozzle massage, Water faucet, Mirror, Handled sprinkling.

67. The CNG engine a Variable Nozzle Turbo ( VNT ) turbocharging intercooling system.

68. Special silex nozzle , smooth inside, angle precise, long - term spray, without crystal.

69. OEM manufacturing spray nozzle and the main steam loom Vice jet parts.

70. Taking advantage of the gas table and the practical losses, the reaction, the outlet flow angle and the throat area of nozzle can be calculated by means of iteration.

71. A water draining switch is switched on after using, and hot water sprays from a water injection nozzle to wash the ass.

72. During the ground test under different working conditions of the gas generator,[sentencedict.com] the influences of the radial clearance and exhaust nozzle area were studied.

73. A logarithmic function describing the relationship between penetration depth and dynamic pressure divided by the square of nozzle number was derived by fitting the data of the computation results.

74. The frequency of vortex increases with the augment of the casting speed, and decreases with the augment of the immersion depth and nozzle angle.

75. Cooling nozzle:Use in table drill machine or hand drill(cooling purpose).

76. Please specify both required suction vacuum and full load capacity or required bypass nozzle diameter.

77. The influence of nozzle port opening width parameter on injection speed under different injection pressures was investigated in this paper.

78. Minute vertical and lateral adjuster is built in the nozzle.

79. Spraying: Use an airless spray gun with a variable jet nozzle.

80. The characters of the new processed nozzle are analyzed from configuration, resistance drop, to heat transfer efficiency and so on.

81. Solid wimble nozzles are commonly used as flushing nozzles at home and abroad, and the flushing flux is one of the most important indexes of the flushing nozzle.

82. The object of the invention is to provide a method of processing a nozzle plate whereby portions around ink ejecting holes of an ink-repellent layer is removed.

83. The droplet sizes (VMD) got smaller with the increase of the working pressures, however[Sentencedict.com ], got larger with the nozzle cap turning back.

84. The experiment and application of C10 sliding gate nozzle was introduced by the authors in this report.

85. And what is more, for different nozzles, the length and width of the bubble cloud of the convergent- divergent nozzle are longer than those of the convergent-straight nozzle.

86. Especially, the precision proofing problem of PT series fuel injection nozzle is the key element.

87. Liquid dispersion process with a sinusoidally vibrated jet was investigated. The course of deformation and breaking of liquid jet from the nozzle was recorded and studied via a holographic technique.

88. Examples of a spherical pressure Vessel with circular nozzle and a digestion tank with conical bottom demonstrate the good capacities of the element.

89. In this paper, we analysed supersonic speed flow of oil steam with using Air Dynamics and required the flow law of oil steam at the edge of the nozzle end.

90. The sound pressure level changes acutely in shock intersection, and shocks outside nozzle and exhaust plume cause strong noise.