Random good picture Not show

61) Start button of armature river boat to build a project, advance main river answer boat project.

62) The author evaluated the output voltage drop owing to the commutative process and armature reaction in detail by means of the analysis of the existent system and the dynamic simulation experiments.

63) The voltage between the system and generator must be small enough to ensure minor current in the armature winding of generator, avoiding the impact to the coupling shaft.

64) Due to the interaction between the permanent magnet and slotted armature lamination, there exists cogging torque in slotted permanent magnet motors, which may cause noise and vibration.

65) Usage: suitable for auto starting motor armature slot insulated S shape automatic shaping and insertion.

65) Sentencedict.com is a online sentence dictionary, on which you can find excellent sentences for a large number of words.

66) The armature includes an armature iron core having slots and teeth and armature windings wound in the slots.

67) Eriction disc and armature surface should be kept clean and free of grease.

68) The human-machine interfaces including speed waveform display and store, armature current monitoring, control parameter setting, experiment instruction and report generator are introduced in detail.

69) Larger magnet wire can then be used which increases the power of the electric motor using the armature having the larger magnet wire.

70) The armature shaft shall not be bent more than 0.003 in.

71) The influencing factors of accelerating force were analyzed numerically, including relative position of coil and armature, current flow, coil size and armature size.

72) X Armature windings that show evidence of having thrown solder without being repaired are not acceptable.

73) This paper explains the difference of the q axis armature reaction between D.

74) When the rotor, and hence the magnetic field, rotates, the armature coil cuts the magnetic-curves and produces electromotive force.

75) In the dynamo, mechanical energy is used for rotating armature between the poles of an electromagnet.

76) The disk type brake comprises a brake strip, a brake disk, a brake armature, a brake spring and a magnetic yoke assembly which are all installed on the inner part of the outer end of the motor.

77) There are position sensor windings in addition to armature windings in the motor.

78) The experimental results showed that muzzle velocity of the projectile was almost linear with the charging voltage of the capacitor bank when the initial position of the armature was fixed.

79) The problems on painting craft of armature winding of mini-direct current dynamo are analyzed, new roll painting crafts are introduced, and properties of the crafts are concluded.

80) Two PI adjusters were applied for wire feeding velocity control, one performed motor armature voltage feedback, the other one executed arc voltage feedback to determine the given velocity.

81) By the study found that core length, length of armature coil resistance for the electromagnetic system the key design parameters.

82) The output power mechanism of a separately excited DC motor can be equivalent to a variable resistance, which is parallel with the armature winding of the motor.

83) If the diameter is less than the minimum, replace the starter armature assembly.

84) The iron with the wound coils on it is called an armature.

85) Then the model is applied to simulate the direct start-up process, the reduced voltage starting process and the starting process with series resistance in the armature circuit.

86) Avery lowered the Stanchion on its shock absorbing armature and hugged it to his shoulder.

87) Features: use air pressure to press commutator and in the meantime press armature wire head into commutator spot welding slot in one time.

88) Usage: suitable for automatic wire embedding of open slot double coils armature winding that shaped to W shape.

89) The air gap between armature and field coil shall not exceed OEM specifications.

90) Dry running linear diaphragm pumps. Two means of actuation: linear and vibrating armature. Very high life time, low noise level and high efficiency. Used as compressors and vacuum pumps.