Random good picture Not show

91. In most of the domestic aluminum ingot production enterprises aluminum ingot packing is done manually, which not only increases the costs, but also exists the physical safety hazards.

92. The gold ingot , silver ingot and notes are ancient currencies.

93. In bottom pouring, the molten steel is poured into a central trumpet, from where it flows through runners to the bottom of a number of ingot moulds.

94. Have celebrated the New Year, have given everybody a gold ingot!

95. The yield and utilization ratio of steel ingot has greatly increased by modern metallurgical techniques.

96. By comparison with manual arc welding, it is found that the thermit welding is a efficiency, energy saving and high quality process for repair welding of steel ingot die.

97. Iron ingot is formed through the black iron ore smelting, ore ratio of 8: 1.

98. Thus a high quality ingot with good surface finish is produced.

99. The service life of the boron surface alloying grey cast iron ingot mold is 43% longer than that of high Mn low si grey cast iron ingot mold.

100. The inclusions distribution in ingot was examined by means of microscopy.

101. To reduce hydrogen and solid non - metal inclusion in aluminum ingot, we designed a kind of on -line air- removing device with high efficiency and good cleaning effect.

102. This paper studies the relationship between the rheological and technological properties of the coating for ferroalloy ingot mold.

103. During the process of rolling ingot with a liquid core the effect of the liquid core ratio on different factors of metal deformation has been investigated by a simulation experiment.

104. This paper describes the shape of truncated pyramid bottom ingot and its effect on slab yield.

105. Macrosegregation of boron in vacuum melting pouring ingot of GH901 alloy is determined by 3 characteristics of boron in the GH901 alloy.

106. Five years later, genghis khan's dabie - sulu ingot pike towards JinGuo oppressors.

107. As it was melting away I hurried off to finish welding a large ingot mold from heavy angle iron .

108. Heating chamber is pivotal part of the polycrystalline silicon ingot production furnace.

109. An explanation is also given to the mechanism of CREM process on restraining macro-segregation of solute elements in 7075 aluminum alloy ingot by DC cast.

110. The limitation of the conventional design of the heavy duty ingot mold has been analyzed in this article.

111. Wool spinning industry also faces the problem pressing ingot like spinning industry.

112. The internal defects of steel ingot have bigger influence to internal quality of block.

113. The ingot mold made of vanadium titanium vermicular graphitic cast iron has the best comprehensive property.

114. The infrared thermometer is mounted on the mechanical scanning mechanism so as to bi-dimensionally scan the surface of the casting ingot.