Random good picture Not show
1. Cerene white frits are lead-free and do not contain zirconium silicate as the opacifying agent.
2. Hot frit adhesive is mixed water radical adhesive is its representing.
3. As the precursor of ancient glasses, faience and frit have different chemical compositions and structures from true ancient glasses.
4. A separate inlet with a ceramic frit is used to aerate the perfusate.
5. Lead oxide in seal frit used for making window assemblies for Argon and Krypton laser tubes.
5. Sentencedict.com is a online sentence dictionary, on which you can find excellent sentences for a large number of words.
6. In fact, it was explained before that this frit did not exhibit an exothermic reaction, probably because there was no devitrification of a crystalline phase.
7. Combining glass frit and reactive bonding is the current answer for the best compromise between adhesion and bondability of thick film conductors.
8. This indicated that the appropriate frit can improve the piezoelectric property of ceramics in right content.
9. A fourth structure, with a poorly defined plan, was interpreted as for the preparation of frit.
10. This picture is therefore entirely consistent with the material being an over-heated frit which has been discarded.
11. By Vis-UV detector, column efficiencies of conically shaped preparative chromatographic columns with porous polytetrafluoroethylene (PTFE) frit and porous stainless steel frit were compared.
12. Therefore, these results prove that crystal formation interferes with the sintering process of a crystalline frit .
13. Principle and technology points of cadmium sulphselenide red glaze of frit method were discussed.
14. Combined with the published chemical compositions of faience and frit, the method and significance of scientific identification of faience and frit are discussed.
15. The influences of lithia content on the melting temperature, mechanical properties and thermal expansion coefficient of low temperature frit were studied.
16. Separation of the two components is accomplished by dissolving the frit in dilute nitric acid.