Random good picture Not show

121 Key problems on energy saving of high emissivity coating at middle temperature are discussed.

122 Sheet resistance has the units of ohms , but it is convenient to refer to it in ohms per square since the sheet resistance produces the resistance of the coating within any square area.

123 The value of the threshold strain is determined by calibrating the coating.

124 Chromate conversion coating resulting in the formation of a passivating film.

125 Be suitable for the people with insomnia and dreaminess , hypodynamia, sallow complexion, dysphoria, depressed expression, or suffering from climacteric syndrome (pale tongue thin coating).

126 Polyvinylidene fluoride (PVDF) coating has been widely used in the exterior decoration of all kinds of architectures for more than 35 years because of its superiority of weathering durability.

127 A number of experiment for rheo-logical behavior of these resins were made, and concluded some principle so as to offer a basis to powder coating production and process design.

128 The effects of cathode current density, mass concentration of suspended W powders, temperature, stirring intensity on the volume fraction of W particles in the Cu-W composite coating were studied.

129 Vertical spraying trolley is a special machine for spraying of different bearings with even coating layers.

130 The mechanisms, coating process and application examples of anti - corrosion coatings for water cooler are introduced.

131 With the development of mechanical machining and airspace technology, solid self-lubricant coating have been widely used for it's unique performance in a scurviness lubricating environment.

132 Its special properties bring lithium montmorillonite a broad applied prospects, it can be used in the field of foundry coating and new electric material.

133 Latest progress and research status of laser cladding ceramic coating was summarized.

134 The conception, fundamentals of CIP system and its application in coating pretreatment were described.

135 The (results) reveal that the coating layer of aluminum hydroxide is loose and porous.

136 METHODS To prepare sustained release pellets using fluid bed, then to get pulsatile-sustained tablet after tabletting and coating.

137 All loose or damaged polyethylene shall be trimmed back to sound coating prior to cleaning, and the edge of the polyethylene shall be bevelled at an angle of 30( with the steel surface.

138 In this article, the influence of curing condition on the coating , catalytic difference of two kinds of platinum catalyst , and influence factors on the release force were studied respectively.

139 Modification of polyacrylic rubber cement composite waterproofing coating was investigated with a chemical modifying agent.

140 OBJECTIVE:To study the effects and security of amlexanox oral coating for treatment of minor recurrent aphthous ulcer.

141 The second type is a ceramic - based coating marketed by Magnaflux Corp.

142 According to the theory of bionics and powders was used to build a coarse structure onto the surface of the coating, and the hydrophobicity was highly improved.

143 The effect of electrolyte temperature on the sparking voltage, coating thickness, and ceramic coating surface morphology was investigated.

144 The rice is washed by diethyl ether before coating vegetable oil. The solvent, dosage of oil and dosage of sample were selected by orthogonal design.

145 Effect of stoving temperature and improvable sodium silicate on the behavior of moisture absorption of coating is studied.

145 Sentencedict.com try its best to collect and make good sentences.

146 Compared to slide coating, curtain coating is impossible to produce any continuing coating defects, because there is no rigid equipment part near the curtain impingement zone.

147 Using advanced ceramics technology, these printers include a durable print drum with a super-hard coating that can produce up 300,000 pages of high-quality printing.

148 Experiments show that the quantum efficiency of devices without and with antireflection coating is about 60% and 85%, respectively.

149 The silicone-acrylate emulsion and architectural coating were prepared with acrylate and silicone intermediate which was synthesized by vinyl group silicone monomer and cyclo-form silicone monomer.

150 Online accurately measured the surface electric - field distribution of SiC stress - grading coating always is a difficulty.