Random good picture Not show

121) Attachment of a special device to the three-roll bending roller allows the quality and efficiency of bending and rolling-up for cone-shaped bodies to improve.

122) The characteristics of the corner rain eaves parts and their forming principle were analyzed. The compound forming was broken into simple bending and flanging.

123) In this study, a simple bending fixture was used to investigate the effects of tensile stress on the growth of NILC.

124) Beam string structure (abbrev. BSS) is an inner equilibrium system whose bending resistance member and tension member is linked by brace strut.

125) Excellent pliability, flexibility and elasticity and suitable for special occasions requiring small bending radius.

126) Bending: means the workpiece from the press brake forming process.

127) This article presents the whole process of calculating in finite-element displacement method by MATLAB, and draws bending moment diagram directly.

128) According to relevant experimental results, the calculating methods of bending strength and crack for steel fiber reinforced ferroconcrete T beam are studied.

129) A quadrilateral plate bending element with 12 degrees of freedom, ACQ,(www.Sentencedict.com) is developed by using the area coordinate method and the generalized conforming approach.

130) However, erroneous length of the slings is always found in practical works, causing non-ignorable effect on the lift force of the slings and the bending moment of the piles.

131) In this paper, problems of bending of thin plates under the combined action of lateral loading and in-plane forces are studied by means of perturbation method.

132) The bending property in transverse direction of tin-phosphor bronze strip is a very important quality index which has a great inference on the quality of final products.

133) The actual stress is not proportional to the bending moment.

134) Bending and cutting automatically avoid the connection, the roundness, automatically cut after bending.

135) "That's too bad, " he said, stepping away and adjusting his vest after his slight bending over. "I was thinking we might go to a show to-night. "

136) With the increase of wood fiber length, the static bending strength of products increases and the internal bond strength decreases.

137) He was fed up with people bending his ear about staying on at school.

138) Study Design. A retrospective review of 34 patients with juvenile idiopathic scoliosis (JIS) treated with a nighttime bending brace.

139) 'Where's that? 'asked Fagin, bending his head forwards, his eyes staring excitedly at Sikes.

140) Abstract: The relationship between fatigue limit and prior austenite grain size has been studied by means of rotating bending fatigue tests for microalloyed case carburizing steels.

141) In the paper, analysis of strength and stiffness of a medium truck frame under bending mode and retorting mode are done.

142) The 29 - year - old comedian has a reputation for gender - bending costumes and occasional vulgarity.

143) The hinge joint can move vertically, which can insure there is only tension act on steel tie rod and avoid bending deflection under the force of groundsill and sand stone.

144) At transition region, the sea ice bending strength reached the maximum value.

145) Patients with LCS accompanied by intermittent claudication adopt a forward - bending posture during walking.

146) The method to plot a shear diagram and bending moment diagram in mechanics of materials has been deeply studied in this paper.

147) If bending forward with straight legs causes pain below one sitting bone, you may have injured your hamstring tendon.

148) Considering vertical and horizontal bending moment and tortile moment action together, equivalent bending moment is proposed in this paper to evaluate anti-bend capability of wall.

149) The bent-tube is a kind of special part with rectangular section, which has a right bending angle, and the traditional bending process is unsuitable.

150) WG-U series hand-operated pipe bending machine can bend circular pipe, square pepe and rectangular pipe into different arc degrees and is characterized by simple operation and convenient use.