Random good picture Not show

31. The transmittance of the YSO H _ 2 - annealed obviously decreases after radiation in the 200 - 500 nm spectral ranges.

32. The films also can be annealed in air or reductive circumstance according to the requirement.

33. We produce the annealed wire with high - quality low carbon raw materials through wire drawing, anneal process.

34. The resistivity of pyrophosphate and annealed acid sulfate copper deposits are substantially equivalent.

35. The CPC electronic packaging materials have the best integrated properties when annealed under the temperate.

36. The crystal morphology, microstructure and hydrogen - annealed formation process has distinct impact on the sag resistance.

37. Therefore, some measures, such as improving the quality of tube billet and the technologies of cold-draw and annealed in process, were found out. And the good effect was obtained.

38. In the first, it is annealed, meaning it is run through a furnace to be softened.

39. The results show that the vanadium oxide thin films are reduced more easily when annealed in low vacuum than when annealed in high vacuum.

40. A well - annealed material may require many days of contact with water.

41. The annealed walls froze all the rigid grief of the actress.

42. Both tensile strengths decrease when annealed at temperature higher than 920 ℃.

43. However, the forward martensitic transformations were greatly suppressed in annealed Co and CoNi.

43. Sentencedict.com try its best to gather and build good sentences.

44. It is shown that the mechanical properties of annealed sample of 2224 aluminum alloy are improved by the combination of solid solution and aging treatment after ECAP, the size of grain is refined.

45. At no time should un - annealed glass apparatus be put into laboratory service.

46. Most nonferrous metals can be annealed, but never tempered, normalized, or case-hardened .

47. The LNO thin films annealed at lower temperature have (110) preferred orientation, while the films annealed at higher temperature have (100) preferred orientation.

48. Rough machining and semi - finishing of the material in its soft ( annealed ) condition.