Random good picture Not show

151. A method of calculating elastic curve for semiflexible plate wind tunnel nozzle has been presented, based on the linear theory of small deflection of beam deformation, in this paper.

152. Prevent the corrosion and rust of the tank and Fuel Injection Nozzle.

153. The results showed that the nozzle type, droplet size, side wind, boom speed and air-assistance were related to the drift potential, but the plant canopy had less influence to the drift.

154. Washes dishes with a super - strong pump aided jet nozzle system thoroughly.

155. The utility model aims to solve the problems such as poor uniformity of product, uneasy control of alloy thickness and easy blockage of nozzle during spraying process.

156. The adjustable nozzle could extend the effective working range of ejectors.

157. The utility model relates to a jet pump with an intake bent pipe, which is mainly composed of a nozzle, an intake chamber, a mixing chamber and a diffusion chamber.

158. The mandril connecting structure is arranged on the jetting joint of the air bottle nozzle.

159. Development status of jet nozzle, the configuration and application of several common jet nozzles are discussed.

160. FL-7 is a continuous transonic wind tunnel, which is powered by three engines. Mach number is adjusted by the rotating speed of engines, the flexible wall nozzle and the by-pass valve.

161. A kind of environmental protection fuel melting copper reverberatory furnace with spray nozzle is introduced.

162. With smaller atomizing air flow rate compared to that of other nozzles, this spray nozzle is particularly suitable to being fixed on furnaces used in marginal oil fields.

163. According to the result of experiment, the Laval nozzle is used as the input unit of ALR.

164. Detail Make of acrylic board , Top Sprinkling, Bath towel rack, Nozzle massage, Water faucet , Handled sprinkling.sentencedict.com/nozzle.html

165. By theoretical calculation and analysis, the necessary liquid pressure and jet nozzle specification are determined.

166. The influence of injector nozzle four orifices flux distribution on fuel spray and ZH1105 diesel engine is studied.

167. Based on the beam blank mould of Ma Steel, the physical model was set up under different nozzle designs and technical parameters.

168. The 3D motion parameter measurement of a rocket motor nozzle is a premiss for accurately controlling the nozzle, and the calibration equipment is the key to ensure motion testing at a high precision.