Random good picture Not show
(121) Breaker This breaker by the electrical machinery, the speed reducer, turns limits the shaft coupling brokenly, the breaker fixed plate, the breaker rotor plate, the main axle is composed.
(122) Used the three axle linkage engine bed to carry on the processing, changed the thread processing technique and using the great procedure programming, and has obtained the good effect.
(123) The noise power, sound intensity, sound pressure, vibration acceleration and corresponding time-frequency spectrum of 6480 driver axle surface were measured and analysed.
(124) Install steering damper onto the axle bracket and drag link.
(125) This is an ANSYS optimum design for driving axle housing of a off - road vehicle .
(126) It is much more advantageous to adopt a taper straight-side triangular spline than an involute one, for example,[sentencedict.com/axle.html] in linking up big gear of wheel bub reductor with axle shaft in heavy duty trucks.
(127) A main clutch is connected through the driving axle of the walking wheel, and the operating rod of the main clutch is connected to the planting device.
(128) The utility model relates to a double-surface button without sewing, comprising an outer surface button, an inner surface button and a middle axle in connection. The side elevation forms an H shape.
(129) The alu driveshaft adapters for the front solid axle are a direct replacement for the stock composite versions but with increased strength and lifespan.
(130) There are two Basic types of axle : dead axles and live axle. The dead axle does not rotate; the wheel rotates on it.
(131) In this text, the authors analyze the relations of the tensile stress under the base with axle weight and base parameters, and consider the characteristics of asphalt base and semi?
(132) Remove nuts attaching splash shield and caliper bracket to axle tube flange.
(133) Through the analysis of these bogies structure, the inner axle - box bogie was deeper understanded.
(134) A rotation axle whose two ends are provided with bearings horizontally passes through the middle portion of the vertical surface of the shell body.
(135) Whether the axle pin can be smoothly bolted into the hinge support is crucial for the whole project. To achieve this goal, a prefabricated taper pin was used to induce the axle pin.
(136) In this paper, the dynamics mode of vehicle axle is established, the state vector of it is calculated and the dynamic performance is analysed.
(137) Through the drive axle housing, the tractate force, braking force and lateral force act on the wheel transfer to the suspension system, frame or carriage.
(138) Frank abandoned his axle as the heat in it died.
(139) Elastic wrench moment axle is an elastic buffer device of cutting transmission system installed on the both ends in the hollow axle of electrical_machinery.
(140) His favorite dysphemism was to ask for axle grease when he wanted butter.
(141) The results anastomose those tested and can provide valuable reference for the designing of rear - axle housing.
(142) The idea of matching compound bulging force parameters and the matching principle for hydro bulging automobile axle housings were proposed.
(143) The solid axle suspension uses a solid steel dead axle (does not turn with wheels) with a leaf spring at each side.
(144) It is advanced that main order work step and add order work step can be extended along time axle. According to restricted condition of every work step exchanging, it can be programmed.
(145) Remove the lower suspension arm nut and bolt from the axle bracket.
(146) Thus the wheel and axle came into being, and with then the first carts.
(147) In case of the noise statistic being unknown or variable, adaptive Kalman filter is used to get drift speed of each axle at each test position, and then drift parameter is calculated.
(148) On the horizontal projection plane, an included angle is formed between the thrusting bars and the longitudinal center line of the axle.
(149) The preselection machine of gaskets is used for selecting the adjusted gaskets in assembling the initiative taper gear axis of the automobiles driving axle.
(150) Axle load conversion methods based on fatigue equivalent were studied.