Random good picture Not show

(1) Taking a welded T-joint as computing example, the forming mechanism of fillet weld's angle distortion was studied by combining thermal elastic plastic analysis with mapping strain component method.

(2) In this paper, the welding temperature of the T-joint is simulated by FEA software ANSYS, and the analysis results approximate to the actual fact is acquired.

(3) The check valve and T-joint are designed into one, this simplifies the installation process and avoids to some troubles.

(4) T-joint is an important constructional form in the structure of automobile body made of aluminum alloy.

(5) Fillet welding experiments on the T-joint and the stiffened plate have verified that its forecasting capability is quite good.

(6) Temperature and stress distribution of multi-pass welded T-joint was simulated using ABAQUS codes.

(7) Temperature and stress distribution of multi-pass welded T-joint was simulated using ABAQUS codes. 3-D solid elements were used to mesh the model.

(8) Localized heating from the welding process and subsequent rapid cooling induces tensile residual stress and angular distortion of the welded structures near the toe of the T-joint in fillet welds.

(9) However, SOTX Ti series racquets really have a lump of Titanium in the built-in T-joint that applies Three-stage method for combing racquets' frame and shaft, updated from Two-stage method.

(10) Experimental result showed that the robot can move out pipe and can pass over obstacles such as flanges T-joint, and L-joint.

(11) Moulded deep into the layers of graphite where the frame connects with the shaft, the YONEX Built-in T-Joint creates a durable and high strength one piece frame that is torque-free.

(12) The results show that after TIG arc remelting treatment, the T-joint weld toe area can improve the shape of the weld toe, however, the area till shows a tensile residual stress state.

(13) A plane weaving method has been discussed to produce T-joint preform. The fabric deformation in the composite molding is calculated.

(14) A mathematical model to describe the traveling-capability of pipeline robot in T-joint is presented, which is composed of a set of constraint equations.

(15) According to the principle of constructing elliptical conical surface by the circles on a sphere, a T-joint inscribed in a sphere is designed.

(16) The mathematical model is the academic groundwork of autonomous navigation strategy design and relevant structure design of pipeline robot in T-joint. Sentencedict.com

(17) Suitable model was established to simulate the temperature distribution of TIG welding of T-joint sheets using ABAQUS code. Temperature dependant material properties were considered in the simulation.

(18) For studying the influence of the horizontal inner plate on the static strength of tubular joints, overall 62 T-joint models with and without reinforcements are analyzed usingfinite element method.

(19) This paper studied mainly multi-T joint test data. By analysis test data, gave experience equation for transverse distortion of T-joint welding structure.