Random good picture Not show

1. Modified zirconia alumina stationary phase 2,4,6 trinitrophenol.

2. A uniform stick zirconia was prepared by direct precipitation in the alcohol.

3. Zirconia cloth is an ideal separator material for the alkaline batteries.

4. A large quantity of zirconia powder is used for plasm spraying to prepare thermal barrier coatings.

5. Zirconia Toughened Mullite ( ZTM ) Ceramics is one of finest Performance high temperature structure ceramics.

6. Cubic Zirconia Machine Cut 100 % Fire Resistant for Jewelry Casting!

7. GREAT WALL GEMS FACTORY is a cubic zirconia manufacturer in Wuzhou, China.

8. A combination of coagulation and microfiltration with zirconia membrane was developed to treat cathodic electrocoating wastewater.

9. Microstructure investigation showed that the zirconia and impurity phases were dispersed in the BN layer matrix.

10. It has been found that zirconia is a promising HPLC packing support.

11. Inorganic: aluminum nitride, zirconia, potassium fluoride, bentonite, kaolin, barium sulfate, lead sulfate, sodium aluminum, chromium oxide, titanium dioxide.

12. The preparation of zirconia sol by anion exchange method from zirconyl chloride as raw material was introduced in this paper.

13. Nanometer tetragonal polycrystal zirconia powder was prepared by the milling method in the super-alkaline medium containing organic addition.

14. The properties of corundum - mullite - zirconia grogs made by reaction - sintering process and their carbon - bonded materials have been investigated.

15. The results show that zirconia coating is typical lamellar structure composed of column grain.

16. Nanometer yttria stabilized zirconia (YSZ) powders were prepared by means of glycine-nitrate process (GNP).

16. Wish you will love sentencedict.com and make progress everyday!

17. The effect of electrocast zirconia and monocline zirconia and two types of binders(anhydrous and un-hydroxyl resin and liquid paraffin)on the sintering of fired magnesia-calcia brick are investigated.

18. The synthesis and characteristics of MgO Partially stabilized zirconia ultrafine powder are investigated in this work.

19. DURA-32 Zirconia Toughened Alumina (ZTA) bead was sintered from alumina powder and zirconium silicate powder.

20. Ultrafine zirconia powder was prepared by coprecipitation and spray - drying method.

21. And the performance of common metal mould and zirconia ceramic mould for R03 batteries was compared. It was pointed out the zirconia ceramic mou ld for battery had good performance and economic value.

22. The results show that fused magnesia - zirconia material has better slag penetra - tion resistance than magnesia material.

23. Special industrial ceramic 、 magnet material and machining parts , such as Zirconia, Alumina, NdFeB and AlNiCo products.

24. A suspension superconducting thin film microwave low-pass filter was developed by using GBCO film on Yttria-Stabilized Zirconia (YSZ) Substrate.

25. Binder removal is one of most time - consuming and significant process of injection molded zirconia ceramics.

26. Titanium nitride was synthesized by ammonia reduction and nitridation under flowing ammonia atmosphere while the content and tetragonal phase structure of zirconia was unchanged.

27. This paper discusses the performance and the application of the zirconia thermal barrier coating.

28. Properties: Rutile type, white powder, non - toxic, chemically inactive, surface treated with zirconia compounds.

29. A proprietary new thin-film deposition technology was used in the zirconia sensor that creates a molecular bond between the zirconia element and the platinum layer.

30. An anode-supported single-chamber solid oxide fuel cell(SC-SOFC) with dense yttria-stabilized zirconia film as the electrolyte was fabricated by the slurry spin coating technique.