Random good picture Not show

31. The measure of core column is adopted to superhigh column, in order to making up the ductility of aseismic performance.

32. There was little change in the bending strength, Young's modulus and dynamic ductility of the test wood treated by microwave irradiation and steaming appropriately.

33. This paper shows the results of a study of an intergranular fracture in bot low alloy steel castings, Poor ductility and low toughness are often associated with fracture mode.

34. The corrosion of reinforcing bar can weaken its strength and ductility, and then cause structural bearing capacity to reduce.

35. It is inferred that low strength and bad ductility which is induced by abnormal heat treatment are the cause of brittle fracture happening for the gear shaft.

36. The bearing capacity and the ductility of a FRP-confined concrete column decrease with the increase of slenderness ratio.

37. The ductility feature will also contribute in the calculation process.

38. Plastic materials should take into account its ductility(Sentencedict.com), unscreened thermoplastic deformation.

39. Saturation and aromatics affect the ductility of asphalt at low temperature.

40. Grain refinement, texture controlling and non basal slip system activation improve ductility of magnesium alloy remarkably, which are promising methods.

41. It is found by transmission electron microscope that the form of antiphase domain boundary has a strong effect on the ductility of ordered alloys.

42. AlN precipitation at the full austenite grain boundary would worsen the ductility of the steels.

43. The various properties of structural steel, including strength and ductility, are determined by its chemical composition.

44. The results show that the electric field treatment increases the ductility of GH4199 alloy but no evident influence on the strength.

45. The result of the experiments shows that the pin benefit to improve the capacity for mucosity and ductility.

46. In view of tectonic deformation assemblages, the paper indicates that the orogenic Belt is dominatly characterized by its fold structural assemblage and dextral ductility shear nappe assemblage.

47. The experiment result shows that adding polypropylene fiber into concrete can improve its ductility and inhibit its cracking process and ultimately achieve the cracking-control aim.

48. It is evident that ductility is a desirable property of structural materials required to resist blast.

49. A new family of metallocene-based polyolefine (MPO) is evaluated. Many properties of MPO, including clarity, flexibility,(Sentencedict.com) low temperature ductility and thermoplastic elastomer behavior are emphasized.

50. The cross- section curvature ductility ratio for R. C inequiaxial T - shaped, l-shaped and cress - shaped columns is calculated by numerical method.

51. Properties determined by mechanical testing, such as yield strength, ductility, ultimate tensile strength, hardness, bendability, impact strength, etc.

52. The decrease in the ductility of the microbeam is attributed to fewer mobile dislocations in the grain.

53. A method to calculate the section curvature ductility index of high strength concrete shear wall is induced by using stress-strain relationship of rectangle stirrup and plane section assumption.

54. Test results indicate the force ductility test is a simple and effective means showing low temperature tension performances of elastomer modified asphalt coating.

55. The hysteresis behavior, bearing capacity, ductility, energy dissipation, rigidity degeneration are studied systematically.

56. Test results indicate the force ductility test is a simple and effective mean of characterization of low temperature tension properties of polymer modified asphalt.

57. The lower the terminate temperature, the higher the volume fraction of ferrite, the larger the size of grain, the lower the yield ratio, the better the ductility.

58. S(subscript RDR) was not strongly dependent on soil types, natural period and ductility factors. Bilinear factor is the most significant parameter controlling S(subscript RDR).

59. Copper plating technology is widely applied to the field of electronic materials manufacturing for the good electrical conductibility, heat conductivity and ductility of copper deposit.

60. The curvature ductility ratio of cross- section for inequal - leg T - shaped, L - shaped and cross-shaped columns are computed by the numerical method.