Random good picture Not show
1. The XPS spectra of carbon fibers electrochemically oxidized in acetic acid, nitric acid, phosphoric acid, sulphuric acid and ammonium carbonate were fitted by a Gaussian Lorentzian mixed function.
2. X-ray photoelectron spectroscopy (XPS) indicated that the higher reaction activity of alkyl halide, the more alkyl substitution degree on hydroxyl group of chitosan.
3. The results of XPS and AES analyses showed that on tinplate surface an anticorrosive coordination compound film of laurylamine was formed, and N atoms in laurylamine molecule were coordinated with Sn.
4. By using XPS, before and after the intoxication of mixed oxide catalysts, the various appearance and the composition. valence and chemical mechanism of the active component of catalysts were studied.
5. ATR - IR and XPS spectra verified the occurrence of the grafting.
6. The surface analysis from XPS indicated that the fluorinated component preferentially self - separation at the film - air interface.
7. The films were characterized using XPS, ATR FT IR, GAIR.
8. Analysis by XPS graph obtained silicon atom ratio of oxygen is about 1:1, the results showed that the films were annealed silicon oxide film is rich silicon oxide.
9. Where the iMac is squarish and silver, the XPS One is all black and rectangular, with speakers attached to the sides and a wide glass base.
10. EPS external wall insulation system, XPS external wall insulation system and roof insulation system.
11. The composite was investigated by XRD and XPS, its electrochemical performance as anode active materials for lithium ion batteries was studied, and its chemical mechanism was discussed.
12. The catalyst was characterized by XRD, XPS and IR techniques in order to study the stability and anti-sulfur ability on the processing of the 200 h HDS of thiophene and strengthening sulfurization.
13. Using micro-analysis methods such as XPS and SEM, the mechanism of the modification methods and materials was analyzed and discussed.
14. The nitrogen and water adsorption isotherms and XPS of two activated carbon fibers (ACF) are determined. The micropore structures and surface properties of ACF are investigated.
15. The structure and protonation level of conductive polyaniline (PANI) chemically synthesized in different reactive systems have been investigated using X-ray photoelectron spectroscopy (XPS).
16. Recently the subject of the application of XPS on surface analysis got fast development.
17. Sesbania gum supported palladium compound was synthesized with simple method and characterized by XPS, IR, TG, DTA, TEM etc.
18. The latter was investigated by the phosphomolybdate blue method, high_resolution TEM and XPS spectrum.
19. The amorphous structure, surface morphology and activity center can be determined and characterized by XRD, EXAFS, DSC, SEM, TEM and XPS.
20. Until now, only VBA Language specification, HealthVault Service specification, UI Automation 1.0, and XPS specification 1.0 were covered by CP.
21. The thermal degradation and charring of both larch lignin and manchurian ash lignin in the condensed phase were comparatively investigated by using TGA(Sentencedict.com), FTIR and XPS.
22. Transfer ratios confirm that the monolayer film can be successfully deposited on the hydrophilic aluminum sheet. XPS measurement p...
23. The pigments were characterized by XRD, SEM, EDS and XPS.
24. The analysis of micro organic contamination on the surface of magnetic head by XPS and TOF SIMS is described in this paper.
25. The microstructure, chemical composition and mechanics performance of the TiN films were examined by OM, SEM, XRD, XPS, Scratch Test and Micro Hardness Test.
26. The degradative effect on surface was examined by SEM and XPS ( ESCA ).
27. The binding energy of sulphur in different forms was obtained by XPS.
28. The varieties and features of surface carbon depositions on nickel catalyst were extensively investigated by TPSR, TPD, XPS and pulse reaction methods.http://Sentencedict.com
29. The macrostructure, the composition of the crystal phase, the surface ion valency and concentration of the catalysts were investigated by BET, XRD and XPS techniques.
30. A series of supported Mo-based catalysts for methanethiol synthesis from high H 2S-containing syngas were investigated by kinetics and XPS, ESR characterization.