Random good picture Not show

31. Watering, coaling equipments and turntable at old Taitung Station, 1968.

32. It has a receiver, a CD player, a double cassette deck, and a turntable.

33. Second autocollimations are used to carry out the continuous calibration of middle-axis and outer-axis of UUT style three-axis turntable.

34. The speed controller on his turntable was not working properly.

35. The mode analysis indicated that the precision optoelectronic tracking turntable frame had good dynamic characteristics, and syntony did not occur.

36. Loosen the height locking screw and remove the arm from the turntable.

37. The friction simulation model of the stabilized turntable is built.

38. The teenage Obama also left a self-composed photograph titled Still Life, featuring a turntable, a beer bottle, a basketball figure, a matchbook and a packet of Zig Zag cigarette papers.

39. I waited at the turntable for hours but my luggage never appeared.

40. The turntable is powered by a single - cylinder steam engine fired by a paraffin boiler.

41. The turntable removal device of the utility model, through the rotating of the screen plate, can effectively avoid cotton accumulation and realize better dust removal effect.

42. The maximum deformation of turntable structure accumulates evidently as the cycle index being increased.

43. A method of measuring the friction parameters of stabilized turntable driven by torque motor is proposed.

43. Sentencedict.com try its best to gather and make good sentences.

44. In the hardware - in - the - loop simulation of homing guidance weapon, five - axis turntable has obvious advantages.

45. The 61m (200ft) three-storey rotating section of the hotel, which contains 50 suites and is based on a turntable in the middle of a purpose-built swimming lake, will rotate 1.3 times per day.

46. The turntable is a system for high degree of accuracy, heavy load and big partial load. Accuracy and structural stiffness is technological key of system.

47. A rigid, precise turntable is attached to the laboratory floor.

48. The phonogram , the first affordable and mass-produced device, played records on a turntable.

49. Control programs about horizontal stabilization of turntable and searching and tracking of azimuth axis were compiled with PMAC language.

50. Thread power cord down through motor hole and out to the back of the turntable.

51. The assembling error of three-axis turntable is unavoidable during assembling process, which is one of the primary system error sources.

52. Both have supplied significant amounts of end - of - line packaging machinery, semi automatic turntable pallet wrappers in particular.

53. This dissertation is written on the background of the double-axis simulation turntable which comes from a project of the control and detection with the aerial camera.

54. When working, turntable with 13 sets die drives for rotating clockwise. Dies move up and down along the curve track, and complete pressing movement through the pressure roller.

55. The solidification process of turntable in sand-faced iron mould was numerically studied, and the basic parameters of the process were obtained.

56. In the stabilized turntable system, the mathematic model of the three-axis turntable is studied through the angular position description with the Euler angle.

57. The present invention discloses a horizontal disc-type plastic injection molding machine, comprising a turntable device, an injecting device and a die closing device.

58. The detecting equipment composes of the TV camera, the thermal infrared imager, the servo turntable and the control cabinet.

59. The Pegasusbrug near Ouistreham in France, which was a stepping stone for tail bridges, is a limited turntable bascule bridge.

60. In order to simulate liner CCD remote sensor flying image and check up its image effect in laboratory, one kind of liner CCD remote sensor uniaxial turntable control system was designed.