Random good picture Not show

1. Flanging, by nature, has the effect of thinning down a signal, especially if used on an extreme setting.

2. Flanging , smooth flow, the strength of the weld.

3. Technological experiments of flanging process were performed with cold-rolled steel sheet (SPCC) under ordinary lab condition.

4. A device can fulfill punching(http://sentencedict.com/flanging.html), flanging and thickening in one stroke of press machine is studied.

5. Flanging, easy flow and the resistance caused by impurities hold, the brass has corrosive effect.

6. Accroding to the flanging die for cylindrical part, die using sliding punch to flange is designed.

7. The influence of average anisotropic coefficient on the flanging height can be considered in this model.

8. As a less using cylinder flanging die, it is designed using a sliding punch to flange.

9. Reasonable die structure dimension and optimum time of flanging and discharging were determined through theoretical analysis.

10. The utility model discloses a weaving and flanging machine of a semi - finished fire hose.

11. In this paper, state of stress and deformation nature of thinning flanging process are analysed.

12. The characteristics of the corner rain eaves parts and their forming principle were analyzed. The compound forming was broken into simple bending and flanging.

13. It is established as intelligential design system of automobile flanging die on base of 2 D environmental.

14. Flanging die design in passenger car manufacturing was emphasized Flanging theory of seamless tube was introduced.

15. The application of the rotational graded wedge mechanism in a flanging die for the shell plate metal sheets greatly raises the production efficiency.

16. Using metal plasticity forming theory, by the technology calculation of sulfur hexafluoride breaker shell flanging, a technology calculation method was introduced about pre-punching flanging.

17. Plasticity in the suppression techniques such as stamping, bending, flanging, such as tensile plate.

18. With the total strain theory and membrane assumption and taking the normal anisotropy of sheet metal into consideration, initial blank size can be directly calculated from desired flanging height.

19. In addition, using columniform punch and conical punch, different stress-strain distribution and thickness distribution at deformation region of flanging is compared.

20. If the delay is too short, it will destructively interfere with the un-delayed signal and create a flanging effect.

21. Metal Forming Machinery, Heavy-duty Machine, Punch Press, Hydraulic Press, Plate Shear, Flanging Machine, Bender, Automatic Forging Machine.

22. Brush after back together, saving on frezer enlarging, and produce backs flanging.

23. First process: Fees the glue paper and body paper into the flanging belt, fold left and right side , then the paper is integrated closely via the drum of the first layer.

24. The system uses intelligential design principle on the base of the modern typical flanging die production and parameter technique in order to realize original model of automobile flanging hardware.

25. In order to prevent mishaps with the union nut, slide it (smallest bore first) over the pipe or nipple and flange hub (when flanging) before making the joint to the end connector.